New Product Info
share to:42K
Expanded Line of Corrosion-Resistant Shaft Collars from Ruland(Jul 30,2008)
Ruland has extended its line of corrosion-resistant shaft collars to include 316 stainless steel, yellow zinc plating, and high-strength grade aluminum with an anodized finish. Shaft collars in 316 stainless steel are particularly suitable for food processing, medical and pharmaceutical applications where washdown is required and contamination from corrosion must be avoided. A high level of resistance to chloride corrosion makes these shaft collars ideal for marine applications as well. Ruland exclusively uses screws made from 316 stainless in these collars to ensure the full anti-corrosive benefits of this material. The yellow zinc plated shaft collars also offer good anti-corrosive properties yet are less expensive than stainless steel alternatives. All of Ruland's lead-free yellow zinc parts are plated using a RoHS compliant trivalent process instead of the non-compliant hexavalent process. Zinc plated shaft collars have less holding power than their black oxide finished carbon steel counterparts. This is due to the reduced coefficient of friction caused by the zinc plating. However, performance of zinc plated parts that utilize plated, high strength alloy steel hardware is still greater than that of stainless steel parts whose holding power suffers from the lower physical properties of stainless steel screws. High-strength grade aluminum shaft collars with an anodized finish have the advantage of being light-weight and having low inertia. They can withstand the recommended screw torque to provide the holding power similar to carbon steel. The aluminum collars are supplied with steel screws for higher torque and holding power. All Ruland shaft collars are single point faced to ensure perpendicularity and proper alignment. A precise shaft collar face to bore relationship ensures that components are both properly positioned and not tilted on the shaft. Collar face perpendicularity also ensures even pressure on interfaced components. The complete line of Ruland shaft collars also includes type 303 stainless steel, black oxide carbon steel and engineered plastic. The collars are available in one- and two-piece clamp-style designs with bore sizes from 1/8" to 6" in the inch series and 3mm to 80mm in the metric series. Shaft collars are part of Ruland's complete product line which also includes rigid couplings with precision honed bores and five types of zero-backlash motion control couplings: beam couplings, bellows couplings, oldham couplings, curved jaw couplings and miniature disc couplings. Direct link to product: http://www.ruland.com/ps_collars_shaft.asp

BRIEF INTRODUCTION

Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.

Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.

China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.

All new product info are from suppliers. If you want to display your new product info,just contact
Service@cnbearing.com