We found that you are a one of the specialists in manufacturing of “Insert Ball bearing” in China and we require the same in a bulk quantity.

We are also a manufacturing and importing full range of bearings and the following series mentioned below also, so if you are manufacturing these series yourself please do let us know.

We need  supplier who sell surplus bearings for selling as special offer in Europe.

We need best quote for the BEARINGS in the attached files.

45449/45410 500

Delivery:20 to 25 Days

Qality Level:GCR15 & Black Radius

Packing:Neutral, No Marking, Industrial Packaging

Pillow Block Ball Bearing Unit RSA1 15/16 NEED GOOD CHINA BRAND

6212-ZZ-HT200 Rpm under 100
For 200 degree temperature 
Can you supply at 1.184usd
1 year warranty
Will need 10pcs sample if possible.
If sample are approved order will be placed for 1200pcs every month. Yearly 14400 pcs will be taken.
Thanks for your reply

We are looking for premium manufacturers of Automotive Bearings in china (just factory).

This is the tender.

One of the bidders complained, that is, he submitted a request for protection of the bidder's rights. The request has been submitted to the state body and is await a decision.

It will continue after the decision is made.

First,Need send us until April 15 the best offer (price and the shortest delivery time  ) for the delivery of cast wheels for the excavator according to the technical documentation attached to it.

The specification contains thirteen positions of cast wheels with imprinted bronze bushings.

1.       TECHNICAL CHARACTERISTIC

-          Material of casted wheel : G42CrMo4 +QT1 ( Rm=850+/-50 MPa ; hardness 45-50 HRC at depth 5 mm on outer diameter ) ,

-          Bushing material : bronze CuAl10Fe3Mn2 ( per DIN 1714 standard) ,

-          Final machining of inner diameter of bronze bushing must be done after assembly

Quantity:

Position no. 1: drawing no. 4324512 (wheel) and drawing 4324524 (bushing) ................................................... 5 pcs,

Position no. 2: drawings no. 50-767-4 assembly; No. 50-546-4 (wheel) and   No.50-766-4 (bushing) ............ ..    66 pcs,

 Position no. 3: drawings no. 41-009-3/A assembly; No. 41-009-3 (wheel) and   No. 41-025-4 (bushing) ............. 4 pcs,

Position no. 4: drawings no. 1866PA1-11-021-1( wheel) ; No. 1866PA1-11-026-1 (  (bushing) .................   ………...7 pcs,

Position no. 5: drawings no. 51-252-4 assembly; No. 51-108-3 (wheel) and   No. 51-234-4 (bushing) ............ ……57 pcs,

Position no. 6: drawings no. 52-199-4/A assembly; No. 52-199-4 (wheel) and   No. 52-200-4 (bushing) ............... 8 pcs,

Position no. 7: drawings no. 1866PA1-11-254-1  (wheel) and   No. 1866PA1-11-251-1 (bushing) ......................... 6 pcs,

Position no. 8: drawings no. 63-014-4A assembly; No. 63-014-4 (wheel) and   No. 63-028-4 (bushing) ..............  16 pcs,

Position no. 9: drawings no. 199-059-4  assembly; No. 80-059-4 (wheel) and   No. 79-059-4 (bushing) ................ 5 pcs,

Position no. 10: drawings no. 46-388-2/A assembly; No. 46-386-21A (wheel) and   No. 46-387-4 (bushing) ............ 6 pcs,

Position no. 11: drawings no. 50-767-4 assembly; No. 50-768-4(wheel) and   No. 50-562-4A (bushing) ................ 26 pcs,

Position no. 12: drawings no. 200-059-4 assembly; No. 81-059-3 (wheel) and   No. 78-059-4  (bushing) ................ 2 pcs,

Position no. 13: drawings no. 52-199-4/A assembly; No. 52-199-4 (wheel) and   No. 52-200-4 (bushing) ............... 6 pcs,

With the offer, you need to send us a valid certificate ISO 9001: 2015 for the production of steel castings and ISO 9001: 2015 for the production of bronze castings (maybe one ISO that covers both productions).

Second, The following goods are required in the tender:

-  Bearing 23192 CAK / W33 “_____________ pcs 14,

- Sleeve OH 3192 H _______________ _          pcs 14,

 Note: Positions 1 and 2, ie. the bearing and the associated sleeve with fuse and nut (package) must be from the same manufacturer.

For participate in the tender, we need a manufacturer which has:

- valid ISO 9001: 2015 certificate for production and development (or for production and design) of bearings and bearings accessories (sleeves, nuts, etc.)

- technical catalog with all technical data in which the offered bearing and sleeve are located.

We need following wheel bearing ,if you can supply,please let us know.

I want RLS 16/300PCS.

         RMS 9/ 500 PCS

       903249/10
       29685/20
      27687/20
      462/453

Last month when ı checked the prices, ıt was quite crazy, ı dont know whether is it good to place an order or not, but what ı know that ı have to place my orders J so that ı have prepared an inquiry that u can find attached

Hope to get your  best FOB prices. 

I am looking for Directional Bearings which are also known as Ball Racers or Cone Sets in India.

If you are manufacturers not trading company then let me know.

Last month when ı checked the prices, ıt was quite crazy, ı dont know whether is it good to place an order or not, but what ı know that ı have to place my orders J so that ı have prepared an inquiry that u can find attached

Hope to get your  best FOB prices. 

We have a tender for bearings, sleeves and bearing housings.

The tender is March 8.

 The following documents are required to participate in the tender:

1. valid manufacturer's certificate ISO 9001: 2015 for the production and development (or production and design) of bearings and sleeves (or accessories, etc.)

2. manufacturer's technical catalog which must contain the bearings and sleeves offered, the publication number or year of issue and in which the basic technical description, basic drawing, all dimensions (tables), technical characteristics (loads, speed, etc.), radial clearance, explanations of additional marks (prefixes and suffixes), etc.

Note :

IIf you are a company that has the required ISO certificate and which have a catalog according to the stated requirements,please let us know.

The tender requires:

 - bearing 23192 CAKW33- 14 pcs

- sleeve OH 3192 H - 14 pcs

Recall, the minimum dynamic load capacity must be 6800 kN, and static 11000 kN.

 3. Valid manufacturer's certificate ISO 9001: 2015 for the production and development (or production and design) of bearing housings (or plummer block)

If you find a manufacturer of bearing housings with ISO 9001: 2015 certification for the production and development (or production and design) of bearing housings (or plummer block), we will send him a drawing of the required bearing housing.

Can you please send us your best quotation for Self-lubricating rod end bearings female thread steel on ptee-metallic fabric maintenance free series, for orders of 250/500/1000/2500/5000 pcs?

Please offer the best quotation bearing ZWZ as below:

1.      Bearing 32230 ZWZ. Q’ty: 50 pcs

2.      Bearing 30618 ZWZ. Q’ty: 50 pcs

:I want this bearings 6201.6202.6203.6204.6205.6206.6007 And many more

Ball bearings like car wheels bearing

We are looking for a good and honest dealer in China who could supply us with bearings, sleeves and bearing housing of original origin Schaeffler .... (FAG).

1.We need following items:

Housing BND 3144-H-W-Y-AF-D – 4 pcs - Schaeffler Technologies  - Germany

Housing BND 3144-H-W-Y-AL-D – 4 pcs - Schaeffler Technologies  - Germany

The goods must be offered completely according to the above prefixes and suffixes.

The goods must be of original origin Schaeffler Technologies  from countries listed .

Please send us your best offer ( price , and shortest delivery time).

If you send us an appropriate offer, we order the goods immediately.

1.1.            TECHNICAL CONDITIONS OF DELIVERY

With the bearings housing delivery must be provided following:

1.      Certificate of conformity of delivered goods with the order (in the form according to EN10204-2.1), issued, signed and sealed by the responsible person of the manufacturer (the draft text of this certificate we will send you before delivery)

1.2. Year of production, packaging and marking:

Each supplied bearing  housing  must be:

1.2.1. Packed in the original unit packaging of the manufacturer on which the following information is written:

- designation bearing   housing,

- serial number of   bearing   housing,

- country of origin and

- name of the manufacturer

1.2.2. Each package must contain a document declaration of the goods, which should contain at least:

Bearing housing designation  , name of the supplier, name of the manufacturer, country of origin and year of manufacturing.

1.2.3. Bearings and sleeves must be new (unused in operation), properly stored and not older than 12 months.

1.3. The following must be marked on the rolling bearings:

- bearing housing  designation  ),

- radial clearance marking,

- manufacturer's mark

- country of origin „ 

2.We have one tender on February 2nd.

There is little time left.

The tender requires a bearing and sleeve:

23192 CAKW33 - 14 pcs

OH 3192 H - 14 pcs

Technical conditions:

- the bearing and sleeve must be from the same manufacturer ,

- the manufacturer must have a valid ISO 9001 certificate for production and development (or for production and design) of the offered goods (bearings and sleeves)

- in the manufacturer's cataloге must be offered bearing and sleeve

- for the bearing the dynamic load capacity must be greater than 6400 kN, the static load capacity greater than 10800 kN

We should have an offer by the end of this week.

If Chinese manufacturers do not meet the above requirements, we need a serious distributor from Schaeffler (you sent us these) and NACHI Japan.

Thanks in advance .