New Product Info
NSK's RHP Range of Self-Lube Housed Bearing Units(Feb 16,2011)
NSK's RHP range of Self-Lube housed bearing units help OEM manufacturers and end users to cut build and maintenance times by reducing bearing complexity and mounting costs.
Self-Lube bearing units provide integrated benefits in general manufacturing industry, food processing, materials handling and agricultural applications.
By providing units that are ready assembled to bolt into place, they enable designers to easily and economically solve specific bearing problems relating to component complexity, mounting, and also bearing maintenance and life in difficult environments.
Self-Lube bearings conform to ISO standards and are available in different materials and configurations.
Cast-iron pillow block and flange types are used for normal and medium-duty applications, while zinc-plated press steel units are available for lighter-duty operations.
In addition, as many Self-Lube units are called upon to operate in harsh environments, NSK has introduced the Silver-Lube range of corrosion-resistant bearings and housings.
These are suitable in applications where frequent washdowns are necessary, optimum hygiene standards are required and good chemical resistance is important.
Together with the RHP Life-Lube range, Silver Lube bearings can also benefit from the sealed-for-life lubrication provided by NSK's Molded-Oil technology.
Suitable for operation in wet or inaccessible applications, Molded Oil is a solid lubricant.
This means that operating environments are kept free of grease - very important in food applications.
In addition, there is no need for refilling of lubricant, as Molded Oil provides a continuous supply of lubricating oil.
Essentially, Self-Lube housed bearing units consist of an insert - normally a 6200 series deep groove ball bearing with cast-iron (pillow block, flange or take-up unit) or pressed-steel housings.
The bearing insert can carry a combination of radial and axial loads in the same way as a standard ball bearing.
It has an extended inner ring with integral shaft-locking device and a spherical outer ring that matches the spherical bore in the housing to overcome initial housing misalignments up to 0.03 radians.
A number of insert types are available for use in light and heavy applications, and high- and low-temperature operating conditions.
Heavy-duty types are used widely in equipment such as pumps and fans.
Designed with a wide inner ring, they facilitate a range of locking methods.
The simplest of these, set screw locking, is suitable for most applications, excepting those where vibration is a problem.
Where vibration does occur, an eccentric locking collar mechanism is supplied.
Alternatively, in applications where positive concentric lock is required, or when heavy vibration or shock loads are present, a taper lock system is preferred.
With all these locking arrangements, standard shafting can be used - there is no need for a precision interference fit.
In applications where Self-Lube Bearings are required to operate in high or low temperature conditions, HLT inserts come into their own.
These inserts provide opportunities to reduce maintenance, downtime and replacement costs at temperatures as high as 180C and as low as -40C.
Especially suited to high temperature applications, HLT inserts are designed with C5 radial internal clearance and high temperature grease and seals to give maximum life - even at +180 degrees C.
As Self-Lube bearings are widely used in operating environments that are dirty and wet (materials handling, agriculture and textiles) they are provided with a choice of effective sealing systems.
The standard S-type seal consists of a robust steel pressing with a nitrile sealing lip that is designed to retain grease within the bearing and keep contaminants out.
For more hostile environments, a Flinger seal has been developed.
This gives increased levels of protection to the standard single lip seal to extend bearing life in arduous conditions without any loss in speed capability.
Finally, offering the highest levels of protection of all is the triple lip seal.
A highly efficient seal, having three nitrile sealing lips, this component is recommended where a high degree of contamination is present.
The Self-Lube range can also be supplied with protection of another kind, this time for factory personnel against the dangers posed by rotating shafts.
A Protector end cover is available for easy fitment to most standard Self-Lube housed bearing units.
Manufactured in mild steel, the patented Protector is difficult to dislodge, yet can be removed without damage and used again repeatedly.
NSK's RHP range of Self-Lube housed bearing units help OEM manufacturers and end users to cut build and maintenance times by reducing bearing complexity and mounting costs.
Self-Lube bearing units provide integrated benefits in general manufacturing industry, food processing, materials handling and agricultural applications.
By providing units that are ready assembled to bolt into place, they enable designers to easily and economically solve specific bearing problems relating to component complexity, mounting, and also bearing maintenance and life in difficult environments.
Self-Lube bearings conform to ISO standards and are available in different materials and configurations.
Cast-iron pillow block and flange types are used for normal and medium-duty applications, while zinc-plated press steel units are available for lighter-duty operations.
In addition, as many Self-Lube units are called upon to operate in harsh environments, NSK has introduced the Silver-Lube range of corrosion-resistant bearings and housings.
These are suitable in applications where frequent washdowns are necessary, optimum hygiene standards are required and good chemical resistance is important.
Together with the RHP Life-Lube range, Silver Lube bearings can also benefit from the sealed-for-life lubrication provided by NSK's Molded-Oil technology.
Suitable for operation in wet or inaccessible applications, Molded Oil is a solid lubricant.
This means that operating environments are kept free of grease - very important in food applications.
In addition, there is no need for refilling of lubricant, as Molded Oil provides a continuous supply of lubricating oil.
Essentially, Self-Lube housed bearing units consist of an insert - normally a 6200 series deep groove ball bearing with cast-iron (pillow block, flange or take-up unit) or pressed-steel housings.
The bearing insert can carry a combination of radial and axial loads in the same way as a standard ball bearing.
It has an extended inner ring with integral shaft-locking device and a spherical outer ring that matches the spherical bore in the housing to overcome initial housing misalignments up to 0.03 radians.
A number of insert types are available for use in light and heavy applications, and high- and low-temperature operating conditions.
Heavy-duty types are used widely in equipment such as pumps and fans.
Designed with a wide inner ring, they facilitate a range of locking methods.
The simplest of these, set screw locking, is suitable for most applications, excepting those where vibration is a problem.
Where vibration does occur, an eccentric locking collar mechanism is supplied.
Alternatively, in applications where positive concentric lock is required, or when heavy vibration or shock loads are present, a taper lock system is preferred.
With all these locking arrangements, standard shafting can be used - there is no need for a precision interference fit.
In applications where Self-Lube Bearings are required to operate in high or low temperature conditions, HLT inserts come into their own.
These inserts provide opportunities to reduce maintenance, downtime and replacement costs at temperatures as high as 180C and as low as -40C.
Especially suited to high temperature applications, HLT inserts are designed with C5 radial internal clearance and high temperature grease and seals to give maximum life - even at +180 degrees C.
As Self-Lube bearings are widely used in operating environments that are dirty and wet (materials handling, agriculture and textiles) they are provided with a choice of effective sealing systems.
The standard S-type seal consists of a robust steel pressing with a nitrile sealing lip that is designed to retain grease within the bearing and keep contaminants out.
For more hostile environments, a Flinger seal has been developed.
This gives increased levels of protection to the standard single lip seal to extend bearing life in arduous conditions without any loss in speed capability.
Finally, offering the highest levels of protection of all is the triple lip seal.
A highly efficient seal, having three nitrile sealing lips, this component is recommended where a high degree of contamination is present.
The Self-Lube range can also be supplied with protection of another kind, this time for factory personnel against the dangers posed by rotating shafts.
A Protector end cover is available for easy fitment to most standard Self-Lube housed bearing units.
Manufactured in mild steel, the patented Protector is difficult to dislodge, yet can be removed without damage and used again repeatedly.
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
All new product info are from suppliers. If you want to display your new product info,just contact
Service@cnbearing.com
