The iglide Clip2 bearing is a thin walled bearing in the iglide M250 material with beveled edge for extremely simple installations. The diagonal slit helps to compensate for poor housing bore tolerance as well as temperature and humidity changes. These self lubricating plain bearings are defined by their impact strength, vibration dampening, and wear resistant properties. They excel in applications in which vibration dampening is necessary, for example, in fitness and
packaging machines.
Compressive Strength:
The permissible static load of iglide Clip bearings at room temperature is 2610 psi. Due to the possibility of high tolerances in the housing bore, the clip bearing has a high compressive strength even for punched holes. For bearing surfaces that are very small, the vibration-dampening properties and the resistance to edge loads are especially important.
Surface Speeds:
Clip bearings are extremely wear-resistant in slow rotating, oscillating, and axial movements. The maximum surface speeds for the different movements are the same as for the iglide M250 material.
With lubrication during installation or continuous lubrication, the permissible speeds can be increased.
Operating Temperatures:
For operating temperatures up to 176 F, iglid clip bearings display high wear resistance.
Even in the cold, the plain bearings remain elastic and wear-resistant.
Installation:
For installation, the plain bearings are pressed together on the side with the large flange. The angled slit makes the bearing spiral -shaped so that it can be placed easily into the metal plate.
The slit also compensates for expansions of the circumference. In this way, a tight clearance is possible with the clip bearings. The recommended clearance allows a nominal size shaft to turn easily. The Clip bearing can also rotate within the housing bore.
Next NTN Deep Groove Ball Bearing for High Thrust Loads
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
