Advantages of the Mobix bearing:
Lubrication free
Does not need axial support
Many uses (wheels, cams, rollers...)
Flexibility for the configuration of gear trains
Suitable methods of fixing
Reduced dimensions and minimum friction
Often, the movement manufacturer faces the problem of designing a gear train with very small dimensions, using a minimal amount of energy. The solutions generally adopted (pivoting wheels, wheels on threaded supports) cannot at the same time satisfy the two criteria of small size and minimum friction with an effective standard of performance. The Mobix ball bearing by mps makes this possible. The compact dimensions of the smallest Mobix bearing (D 1.28mm; H 0.50mm) and the amply proven effectiveness of the ceramic ball bearing technology open up new horizons for timepiece designers.
Maximun flexibility
With Mobix, mps creates a flexible concept. On the outer ring of a Mobix bearing, the engineer can add any other type of wheel, disk, roller, cam and lever. For example, a single type of Mobix bearing can drive a whole gear train comprising wheels of diffrent dimensions and characteristics. According to the size of the Mobix bearings, mps offers two methods of fixing: the first with a pivot integrated to the inner ring to be driven onto the bottom plate or bridge and the second using a screw in the inner ring centered on the bottome plate or bridge by a threaded support.
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
