Miki Pulley announces introduction of its Step-Flex Coupling for direct sale to OEM’s in North America. The Step-Flex is an altogether new class of shaft coupling. This design was conceived to eliminate resonance in stepper motor ball screw assemblies. The innovative two part elastomer element combination dampens vibration caused by the actuator carrier struggling to find its home position by making small adjustments in rapid sequence. With this construction, the hard (black) element is separated from the aluminum alloy hubs by a softer (green) elastomer. This maintains enough torsional stiffness for precise positional accuracy while still allowing for minimal angular and parallel misalignment, and absorbing vibration. The power-transmitting element, consisting of different hardness layers also achieves a reduction in counter force generated by misalignment. This can greatly reduce the load on the bearing – resulting in reduced heat load.
•5 sizes available
•Torque: 53 in-lbs. (6 Nm)
•Bore size range: 1/8” to 5/8” (3 mm - 16 mm)
Step-Flex applications include automation of all types where ball screws are used including packaging, semi-conductor assembly, laboratory automation and medical equipment.
Miki Pulley
URL: www.mikipulley-us.com
Next NTN Develops “Low Section High Strength Press Pulley” for Engine Accessory Belts
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
