New Product Info
Drive Lines Gearboxes Bring Flexibility to Machine Tools(May 24,2016)
Whether cutting, boring, grinding or shearing, modern machine tools have to meet what at first sight appear to be conflicting operational needs. On the one hand they need to provide fast cutting for final finish work and/or the rapid processing of soft materials; but they must also have low speed and high torque capabilities for rough cutting and hard materials. This dual speed requirement is beyond the capabilities of a spindle motor alone, but can be created by the addition of a two-speed gearbox. With a direct drive or 1:1 gear ratio, the spindle motor runs in high speed mode, while the lower ratio will reduce speed and increase torque. Together the two speed capabilities increase the usability of the machine tool enormously. The result is that the full cutting power is available across the widest possible speed range. Depending on the motor and gearbox specification it is possible to provide speed ranges with constant power of up to 1:20. While there are numerous different gearbox designs, planetary gears offer a number of advantages in machine tool applications. For instance they are more compact than most alternatives because the power transmission is shared between several gears, and space saving is always useful in machine design. They are also quiet, reliable and easy to use. Drive Lines offers the ZF Duoplan gearbox, which is ideal for use in machine tools and many other applications. One of its design features, the floating sun gear, means the Duoplan is tolerant of misalignment and concentricity issues that may arise in machine tool applications. This reduces the generation of heat and vibration during operation, improving reliability and extending the working life of the unit. Further, combining the simultaneously meshing planetary gears with a helical gearing profile assures low noise, even at high operating speeds. Characterized by their optimized torque transmission capabilities and superior low speed performance, the ZF Duoplan can be used in horizontal or vertical configuration. They can connect straight to the spindle motor without the need for additional components, thus further promoting operational reliability. ZF Duoplan gearboxes provide a choice of two output variants. The standard long bearing base output flange version is used for belt drives, allowing high cantilever forces. As an option, an extended output version delivers higher belt forces. The second variant is the INLINE with short output housing and angular contact bearings for direct drive applications. As an option, the INLINE version can have through-spindle coolant delivery, which can be high-pressure (140 bar), high flow (35 liters per minute) for cooling the cutting tool in very demanding applications. Drive Lines offers the Duoplan in seven different sizes: covering nominal input torques from 120 Nm to 2,100 Nm and nominal output torques from 120 Nm to over 11,000 Nm, with powers from 19 kW to 120 kW. The range accommodates motor frame sizes from 100 to 280, with the motor-gearbox combination usually fixed to the machine frame or bed via the gearbox feet. Open and closed versions of the gearbox let machine designers optimize its interface with the motor. The open version has no adapter plate and is sealed by the motor’s shaft seal. The closed version can be supplied with a standard shaft seal or with ball bearings which prevent any axial movement. Three backlash classes are available Class 3 provides nominal backlash of less than 30 arc min (or 40 arc min in the very largest ZF Duoplan models), and meets the needs of workpiece processing with constant cutting force. Class 2 provides less than 20 arc min of backlash, meeting the needs of milling machines and machine centers used in precision work. This class is also useful in applications that require interrupted cutting, ribbed workpieces and very tough materials. Drive Lines Technologies Ltd. Phone: +44 (0) 1234 345673 URL: www.drivelines.co.uk
Whether cutting, boring, grinding or shearing, modern machine tools have to meet what at first sight appear to be conflicting operational needs. On the one hand they need to provide fast cutting for final finish work and/or the rapid processing of soft materials; but they must also have low speed and high torque capabilities for rough cutting and hard materials. This dual speed requirement is beyond the capabilities of a spindle motor alone, but can be created by the addition of a two-speed gearbox. With a direct drive or 1:1 gear ratio, the spindle motor runs in high speed mode, while the lower ratio will reduce speed and increase torque. Together the two speed capabilities increase the usability of the machine tool enormously. The result is that the full cutting power is available across the widest possible speed range. Depending on the motor and gearbox specification it is possible to provide speed ranges with constant power of up to 1:20. While there are numerous different gearbox designs, planetary gears offer a number of advantages in machine tool applications. For instance they are more compact than most alternatives because the power transmission is shared between several gears, and space saving is always useful in machine design. They are also quiet, reliable and easy to use. Drive Lines offers the ZF Duoplan gearbox, which is ideal for use in machine tools and many other applications. One of its design features, the floating sun gear, means the Duoplan is tolerant of misalignment and concentricity issues that may arise in machine tool applications. This reduces the generation of heat and vibration during operation, improving reliability and extending the working life of the unit. Further, combining the simultaneously meshing planetary gears with a helical gearing profile assures low noise, even at high operating speeds. Characterized by their optimized torque transmission capabilities and superior low speed performance, the ZF Duoplan can be used in horizontal or vertical configuration. They can connect straight to the spindle motor without the need for additional components, thus further promoting operational reliability. ZF Duoplan gearboxes provide a choice of two output variants. The standard long bearing base output flange version is used for belt drives, allowing high cantilever forces. As an option, an extended output version delivers higher belt forces. The second variant is the INLINE with short output housing and angular contact bearings for direct drive applications. As an option, the INLINE version can have through-spindle coolant delivery, which can be high-pressure (140 bar), high flow (35 liters per minute) for cooling the cutting tool in very demanding applications. Drive Lines offers the Duoplan in seven different sizes: covering nominal input torques from 120 Nm to 2,100 Nm and nominal output torques from 120 Nm to over 11,000 Nm, with powers from 19 kW to 120 kW. The range accommodates motor frame sizes from 100 to 280, with the motor-gearbox combination usually fixed to the machine frame or bed via the gearbox feet. Open and closed versions of the gearbox let machine designers optimize its interface with the motor. The open version has no adapter plate and is sealed by the motor’s shaft seal. The closed version can be supplied with a standard shaft seal or with ball bearings which prevent any axial movement. Three backlash classes are available Class 3 provides nominal backlash of less than 30 arc min (or 40 arc min in the very largest ZF Duoplan models), and meets the needs of workpiece processing with constant cutting force. Class 2 provides less than 20 arc min of backlash, meeting the needs of milling machines and machine centers used in precision work. This class is also useful in applications that require interrupted cutting, ribbed workpieces and very tough materials. Drive Lines Technologies Ltd. Phone: +44 (0) 1234 345673 URL: www.drivelines.co.uk
Previous AutomationDirect Introduces Miniature Inductive Proximity Sensors
Next AppliMotion Releases Slotless Zero Cogging Motor Kits
Next AppliMotion Releases Slotless Zero Cogging Motor Kits
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
All new product info are from suppliers. If you want to display your new product info,just contact
Service@cnbearing.com
