ArvinMeritor Recalls Drivelines Over Bearing Separation(Pic)
Resource from: CBCC Likes:2977
Nov 14,2006
ArvinMeritor Recalls Drivelines Over Bearing Separation
ArvinMeritor Inc. (USA; NYSE: ARM) is recalling almost 4,000 heavy-duty truck driveline assemblies due to u-joint bearing cup separation. Driveline parts can then fail and separate from the truck, becoming potentially lethal high-speed road debris.
The recall involves 3,791 of AM's RPL20 high-angle inter-axle drivelines, shipped to Volvo Trucks North America and Freightliner between June 15, 2006 and August 28, 2006.
In its notification, AM said an improperly seated, or missing, snap ring can result in the u-joint bearing cup separating from the slip-yoke subassembly. The displaced slip yoke could then be hit by the u-joint cross as it spins, causing the yoke to fracture.
A truck with two powered axles would use the inter-axle RPL20 to carry power from the first driven axle to the one behind it. RPL20 is rated for 14,730 foot pounds of torque, and is part of AM's permanently greased driveline series, requiring no regular maintenance. As a downside, operators may fail to inspect the driveline, leaving problems undetected.
U-joints in the RPL20 are double-row needle roller bearing units, sealed and with a nylon thrust washer to eliminate metal-to-metal contact.
ArvinMeritor then goes on to describe the consequences:
Should the driveline separate, the vehicle could become inoperable. In addition, a driveline that has separated from the vehicle could come in contact with nearby vehicles or persons, possibly resulting in a crash or personal injuries.
The RPL20 is an older, well-proven design in use for over a decade. ArvinMeritor inherited the RPL line from Rockwell as part of its PermaLube line (RPL = Rockwell PermaLube).
In its product description, ArvinMeritor describes the RPL20 u-joints as using snap rings as, "a secure, proven method for positioning u-joints to achieve a perfect fit."
The description goes on to say: "bearing cups are accurately positioned for optimum performance and are held permanently in place with a steel weld strap. Bearing cup removal during assembly or disassembly is not required, eliminating the potential for contamination."
With the steel weld strap in place, it is unclear how the cup could separate from the slip yoke sub-assembly and become the basis for the recall.
Volvo, in its recall notice (Volvo: RVXX0605, NHTSA: 06V385000), said the build dates for the trucks it will recall covers a slightly wider range; 3,842 trucks built between June 1, 2006 and August 31, 2006.
In its notification, AM said an improperly seated, or missing, snap ring can result in the u-joint bearing cup separating from the slip-yoke subassembly. The displaced slip yoke could then be hit by the u-joint cross as it spins, causing the yoke to fracture.
A truck with two powered axles would use the inter-axle RPL20 to carry power from the first driven axle to the one behind it. RPL20 is rated for 14,730 foot pounds of torque, and is part of AM's permanently greased driveline series, requiring no regular maintenance. As a downside, operators may fail to inspect the driveline, leaving problems undetected.
U-joints in the RPL20 are double-row needle roller bearing units, sealed and with a nylon thrust washer to eliminate metal-to-metal contact.
ArvinMeritor then goes on to describe the consequences:
Should the driveline separate, the vehicle could become inoperable. In addition, a driveline that has separated from the vehicle could come in contact with nearby vehicles or persons, possibly resulting in a crash or personal injuries.
The RPL20 is an older, well-proven design in use for over a decade. ArvinMeritor inherited the RPL line from Rockwell as part of its PermaLube line (RPL = Rockwell PermaLube).
In its product description, ArvinMeritor describes the RPL20 u-joints as using snap rings as, "a secure, proven method for positioning u-joints to achieve a perfect fit."
The description goes on to say: "bearing cups are accurately positioned for optimum performance and are held permanently in place with a steel weld strap. Bearing cup removal during assembly or disassembly is not required, eliminating the potential for contamination."
With the steel weld strap in place, it is unclear how the cup could separate from the slip yoke sub-assembly and become the basis for the recall.
Volvo, in its recall notice (Volvo: RVXX0605, NHTSA: 06V385000), said the build dates for the trucks it will recall covers a slightly wider range; 3,842 trucks built between June 1, 2006 and August 31, 2006.
()
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Igus Enters the Linear Actuator Arena with the Debut of DryLin ZLW (Pic)
Next Kaydon Reports Third Quarter 2006 Results
Next Kaydon Reports Third Quarter 2006 Results
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
