Ball Screws Available From T.E.A. Transmissions
A Ball Screw is a threaded shaft that provides a spiral raceway for the ball bearings assembled in a nut. This combination provides a precision screw to enable controlled rotational motion to be converted into linear motion.
Ball Screws are able to withstand high thrust loads with minimal internal friction. They are made to close tolerances and are therefore suitable for use in applications where high precision is necessary.
While reducing friction, Ball Screws can operate with some preload, effectively eliminating backlash between input rotation and output linear motion. This feature is essential when they are used in computer-controlled motion-control systems e.g. CNC machines tools.
The four preload classes available in the standard nuts are P0 With Backlash, P1 No Backlash, P2 Light Preload and P3 Heavy Preload.
These low friction Ball Screws yield high mechanical efficiency compared to other alternatives. A typical Ball Screw may be 90% efficient, versus 50% efficiency for a trapezoidal thread of equal size. This low internal friction also means Ball Screws can be back driven (depending upon their lead angle) and therefore are usually unsuitable for hand operated machine tools, in which case trapezoidal thread spindle is the better choice.
Ball Screws are fabricated as either ground or rolled screw shafts. Although Ground Ball Screw is designed for the high precision requirements, Rolled Ball Screw, which is less precise and considerably less expensive, is still a mechanically efficient product to be considered.
Rolled Ball Screw can have positional precision as low as 0.003mm over 300mm of travel for high precision grade (C0) and 0.05mm for the same length of travel for a low grade (C7).
Whether using Ground or Rolled Ball Screw great care is needed to avoid contamination by dirt and other abrasive particles so as to maintain the inherent accuracy and ensure long life. This is easily and simply achieved by using rubber or leather bellows to completely or partially enclose the working surfaces.
Ball Screws are available from T.E.A. Transmissions .
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next Pacific Bearing Company Introduces New Line of Linear Actuators
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
