Bell Helicopters Grounded to Inspect Control Bearings
Resource from: CBCC Likes:2939
Jun 15,2009
The U.S. Federal Aviation Administration has grounded 2,715 Bell helicopters to order immediate inspections for improperly installed control bearings. The FAA terms this a, "critical unsafe condition" in requiring the short compliance time.
Affected models are the Bell 206A, 206B, 206L, 407 and 427 models.
Before the next flight, the FAA requires inspecting each cyclic control lever assembly that has less than 50 hours in service. The inspection is to determine if the bearing may be improperly installed or improperly staked in the lever assembly.
The Airworthiness Directive was the result of a report of an recently installed, but incorrectly installed bearing in the co-pilot's cyclonic control lever assembly. Improperly assembled, the bearing can fail, causing loss of control of the helicopter.
The Bell Alert Service Bulletins are 206-09-121, 206L-09-155, 407-09-85, and 427-09-23, dated March 10, 2009.
Bell's service bulletins indicate the company became aware of two instances where the bearing migrated out of the flight control lever because it had not been staked during assembly. Most troubling, each individual piece had been marked as fully inspected by Bell's supplier.
In a related understatement, Bell said: "Review of the supplier’s manufacturing and quality process indicates inspection of additional components is warranted."
In other words, Bell has decided to be cautious and has issued a second series of Service Bulletins, requiring that every bearing component -- six, in all -- from that particular vendor be inspected to ensure that the bearings are installed properly.
Bell Helicopter Alert Service Bulletin 427-09-25 for the 427 series (others similar)
Bell did not indicate why every bearing -- presumably from different manufacturing processes or cells -- should be inspected. It is possible, but not likely, that a vendor would use the same bearing staking machine for every different component produced.
A Bell spokesman said the company itself discovered the improperly installed bearings in the co-pilot cyclic controls. It was reported when Bell's Canadian arm set out to deliver a new helicopter. The situation was immediately reported to the Canadian aircraft authorities, Transport Canada.
Failed or displaced bearings in the co-pilot cyclic controls can lead to control malfunction and crash.
Although authorities have ordered inspections of all the potentially affected helicopters, Bell said it hopes visual inspections will reduce the number of affected helicopters to around 110. So far, it has not found any others in the in-service fleet.
Affected helicopters are not only in civil aviation, emergency and commercial use, but also in military deployments around the world.
()
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous NTN Corporation - Financial and Operations Review - Companies and Markets New Analysis
Next IBS Expands New Way Air Bearings Range
Next IBS Expands New Way Air Bearings Range
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
