Simplicity Sleeve Bearing and Flange Bearing Installation Instructions
1.Machine the housing to the recommended I.D. for a slip fit, apply Loctite® or other adhesive to the O.D., and slip the bearing into the housing. Be sure to allow the proper time for the adhesive to cure as specified by the adhesive manufacturer. CAUTION: Do NOT allow any of the adhesive to touch the bearing liner. It will harden and interfere with the proper running clearance for the bearing.
2.Machine the housing bore to the recommended press fit tolerance as specified in the PBC Linear catalog. Freeze the bearings at 0°F (-17.75°C) for 30-45 minutes. Using gloves, remove the bearings from the freezer and slip them into the housing. As they quickly heat to room temperature, full contact between the bearing and the housing will be achieved. The greatest advantage to this technique over traditional pressing is greater accuracy in alignment.
NOTE: Due to misaligment and shearing of material, PBC Linear does NOT recommend a press fit, either manually with hammer or mallet, or with the aid of an arbor press.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next Isolast® J9876 Material Meets Most Mechanical Sealing Requirements
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
