Timken Posts Strong Quarter; Company Raises Full-Year Forecast
Resource from: Timken Likes:2976
Oct 28,2011
CANTON, Ohio, Oct. 27, 2011 /PRNewswire-FirstCall/ -- The Timken Company (NYSE: TKR) today reported sales of $1.3 billion in the third quarter of 2011, an increase of 25 percent over the same period a year ago. The increase primarily reflects demand growth across the company's diverse industrial markets, as well as favorable effects from pricing, material surcharges and acquisitions.
The company generated higher third-quarter income from continuing operations, up 55 percent to $111 million, or $1.12 per diluted share, net of non-controlling interest, compared with $71.4 million, or $0.73 per diluted share a year ago. The improvement reflects higher volume, favorable mix, surcharges and pricing, which more than offset increased raw-material costs, as well as higher selling and administrative costs. The results also reflect a higher tax rate during the quarter, at 38.5 percent, primarily from a recent change in French tax law that was retroactive to the beginning of the year.
"With the addition of this quarter's strong performance, we earned more in nine months than our previous annual record," said James W. Griffith, Timken president and chief executive officer. "This accelerated performance shows our strategy is working, positioning Timken to serve attractive industrial markets that today are growing faster than the economy in general. We are leveraging that growth to higher profitability."
Among recent developments, the company:
Completed on July 1 its $200 million acquisition of the assets of Philadelphia Gear Corporation, a leading provider of aftermarket services for gear-drive systems in diverse industrial and marine applications;
Acquired for $92 million Drives LLC, a leading manufacturer of highly engineered drive-chains for mobile and industrial machinery;
Opened early negotiations for its 2013 labor agreement with the United Steelworkers of America to support a potential $225 million investment at its Faircrest Steel Plant in Canton;
Broke ground on the Wind Energy Research and Development Center at Stark State College in Canton;
Announced an open-innovation agreement with The University of Akron to accelerate development of material and surface engineering technologies;
and Received recognition as a top business technology innovator on the InformationWeek 500 list.
Nine Months' Results
Timken posted sales of $3.9 billion in the first nine months of 2011, up 31 percent from the same period in 2010. Strong end-market demand drove the increase, along with favorable pricing, surcharges and currency effects.
The company's earnings from continuing operations increased 91 percent to $345.2 million, or $3.48 per diluted share, net of non-controlling interest. That compares with $181.1 million, or $1.86 per diluted share, earned in the same period last year. The first nine months of 2011 earnings benefited from increased demand, higher surcharges and a combination of favorable pricing and mix, which more than offset higher raw-material and logistics costs, as well as selling and administrative costs. The nine-month tax rate of 35.2 percent was lower than the prior year's rate of 40.2 percent, which included the effect of U.S. healthcare legislation.
Total debt as of Sept. 30, 2011, was $512.1 million, or 18.7 percent of capital. The company had cash of $406.5 million and net debt of $105.6 million at the end of the third quarter, compared with a net cash position of $363.4 million at the end of 2010.
For the first nine months, the company used $67.4 million in cash from operating activities, as strong earnings were more than offset by higher working capital requirements to support demand and $256 million of discretionary contributions, net of tax, to the pension and VEBA trust plans. Excluding these discretionary contributions, free cash flow (operating cash after capital expenditures and dividends) was $26 million. The company continues to maintain a strong balance sheet and ended the quarter with $1.3 billion of available liquidity.
Mobile Industries Segment Results
In the third quarter, Mobile Industries' sales were $441.6 million, up 9 percent from last year's third-quarter sales of $404.1 million. Higher demand in the off-highway, rail and heavy truck sectors drove most of the increase, along with favorable pricing and currency.
The Mobile segment achieved EBIT of $65.2 million, or 14.8 percent of sales, in the third quarter of 2011, up 14 percent compared with the prior year's EBIT of $57.1 million, or 14.1 percent of sales. The increase reflects stronger volume, as pricing mostly offset higher material costs during the quarter.
For the first nine months of 2011, Mobile Industries' sales of $1.3 billion were up 15 percent from the same period a year ago. EBIT for the first nine months of 2011 was $200 million, or 14.8 percent of sales, compared with $165.3 million, or 14.1 percent of sales, the prior year.
Process Industries Segment Results
Process Industries' third-quarter sales rose 40 percent to $328.9 million, compared with $234.5 million for the same period a year ago. Stronger demand from industrial distribution, the Philadelphia Gear acquisition, growth in Asia, higher new-product sales and pricing primarily accounted for the increase.
Process Industries' third-quarter EBIT was $77.5 million, or 23.6 percent of sales, up 111 percent from $36.8 million, or 15.7 percent of sales, a year ago. Higher volume, the Philadelphia Gear acquisition and favorable pricing contributed to the increase.
For the first nine months of 2011, Process Industries sales were $922.2 million, up 41 percent from the same period a year ago. EBIT for the first nine months of 2011 was $214.5 million, or 23.3 percent of sales, up from the prior year's EBIT of $89.2 million, or 13.7 percent of sales.
Aerospace and Defense Segment Results
Aerospace and Defense posted slightly higher third-quarter sales of $81.8 million, compared with $81 million in the same period last year. The segment saw improved demand in commercial and general aviation, largely offset by decreased demand for defense-related products.
The segment incurred a third-quarter loss of $1.5 million, or 1.8 percent of sales, compared with EBIT of $2.5 million, or 3.1 percent of sales, in the same period a year ago. Although the segment benefited from improved commercial and general aviation demand and lower operating costs, these factors were more than offset by a $5 million increase in warranty reserves.
For the first nine months of 2011, Aerospace and Defense sales were $244.4 million, down 4 percent from the same period a year ago. The decrease primarily reflects lower demand in the segment's defense-related business. EBIT for the first nine months of 2011 was $4 million, or 1.6 percent of sales, compared with EBIT of $20.5 million, or 8 percent of sales in the first nine months of 2010. In addition to reduced volume, the decline reflects lower manufacturing utilization, as well as charges totaling $8 million for inventory and warranty reserves.
Steel Segment Results
Sales for the Steel segment, including inter-segment sales, were $501.5 million in the third quarter, an increase of 35 percent from $371.3 million for the same period last year. Stronger demand, particularly in the energy and industrial sectors, contributed to broad-based improvement, as well as favorable pricing and surcharges. Raw-material surcharges increased approximately $45 million from the third quarter last year.
Third-quarter EBIT was $67.1 million, or 13.4 percent of sales, up 62 percent from $41.3 million, or 11.1 percent of sales, for the same period a year ago. These results reflect improved pricing, stronger volume and favorable mix, especially in the industrial and energy sectors, partially offset by higher costs for material and planned maintenance.
For the first nine months of 2011, Steel segment sales were $1.5 billion, up 52 percent from the first nine months of last year. Higher demand in the oil and gas market led the increase, which also reflected broad-based industrial growth and surcharges. Raw-material surcharges increased approximately $170 million from the same period a year ago. EBIT for the first nine months of 2011 was $199.2 million, or 13.4 percent of sales, compared with $104.2 million, or 10.6 percent of sales, last year.
Outlook
For the full-year 2011, Timken anticipates a sales increase of approximately 25 to 30 percent. For each of its business segments in 2011, Timken expects:
Mobile Industries sales up 10 to 15 percent, with higher demand in the off-highway, rail and heavy-truck sectors;
Process Industries sales up 35 to 40 percent, with increased demand from global industrial distribution, continued growth in Asia, acquisitions and rising new-product sales;
Aerospace and Defense sales down slightly on continued weakness in demand for its defense-related products; and
Steel sales up 40 to 45 percent, driven by stronger demand in the energy and industrial sectors, as well as capacity increases and surcharges.
Timken projects annual earnings in the range of $4.45 to $4.55 per diluted share. The company should generate approximately $210 million in cash from operations and expects to use $65 million in free cash flow after making capital expenditures of about $200 million and paying $75 million in dividends. Excluding year-to-date discretionary pension and VEBA trust contributions of $256 million, net of tax, the company expects annual free cash flow of approximately $190 million.
Conference Call Information
The company will host a conference call for investors and analysts as follows:
Conference Call:
Thursday, Oct. 27, 2011 11:00 a.m. Eastern Time
All Callers: Live Dial-In: 800-344-0593 or 706-634-0975
(Call in 10 minutes prior to be included.)
Conference ID: 15486445
Replay Dial-In through Nov. 3, 2011: 800-642-1687 or 706-645-9291
Live Webcast: www.timken.com/investors
About The Timken Company
The Timken Company (NYSE: TKR; www.timken.com) keeps the world turning with innovative friction management and power transmission products and services that help machinery perform efficiently and reliably. With sales of $4.1 billion in 2010 and 20,000 people operating from locations in 30 countries, Timken is Where You Turn® for better performance.
(Timken)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Timken Expands Training and Information Resources at AAPEX
Next Maria-Elisabeth Schaeffler Receives „Großer Tiroler Adler” Medal from the State of Tyrol
Next Maria-Elisabeth Schaeffler Receives „Großer Tiroler Adler” Medal from the State of Tyrol
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
