Tough and Durable: Rolling Bearing Cages with DLC Coating
Resource from: ThomasNet Likes:375
Dec 20,2013
Steyr, Austria. – NKE Austria GmbH introduces rolling bearing cages with DLC (Diamond-like Carbon) coating. These steel cages coated with DLC are tougher and last longer than the standard, uncoated brass variants, and are ideally suited to harsh operating conditions. Other bearing components besides cages can also be treated with the amorphous carbon coating.
As part of its continuous effort to improve the performance capabilities of its rolling bearings, NKE researches surface coating technologies and uses alternative cage materials. Bearings that are used in machines with high radial accelerations, centrifugal forces or vibrations are typically equipped with inner-ring or outer-ring guided, primarily one-piece, solid brass cages in order to minimise any undesirable effects the cage may have on the motion characteristics of the rolling elements. Examples of typical applications include big end bearings, fast accelerating gearboxes or generator systems. Although solid brass cages are an acknowledged standard, they are still subject to certain operating limits. In applications with heavy loading, excessive wear, abrasion of the cage guide surfaces or even mechanical failure can occur.
In order to improve the performance of radial cylindrical roller bearings and radial deep groove ball bearings in particular, for demanding operating conditions NKE uses a cage made from high strength material with an amorphous carbon coating, the DLC coating with NKE suffix SQ202. This increases resistance to breakage and lowers the coefficient of friction between the rolling bearing shoulders and the cage, helping to prevent premature wear or abrasion especially in applications where lubrication is difficult. The material of choice for the cage is steel, and depending on the design of the bearing the cage may be machined solid steel with inner or outer ring guidance. These cages are identified accordingly with the suffixes F(P)A or FPB.
The coating itself must satisfy the following requirements: it must be hard and wear-resistant, and adhere to the surface for the entire operating period. Due to its low coefficient of friction and good sliding properties, the coating provides protection from adhesive wear and withstands lubricant starvation conditions. One of the most important properties of the coating is that it prevents wear and thus also the abrasion particles that become trapped by the lubricating grease in the bearing. The wear process cannot be entirely stopped, but the coating improves the steel cages‘ resistance to wear significantly, preventing scuffing on the cage support surfaces. It helps to prolong the service life of bearings significantly in extreme operating conditions. The use of the coating is not restricted to cages – practically all NKE bearing components made from steel can be supplied with this surface treatment.
The coating has undergone application-specific tests carried out jointly with a customer, and very positive results were obtained. The service life of bearings was extended considerably, and mechanical failures were eliminated altogether. When compared directly with uncoated brass cage variants, the steel cages with the SQ202 coating offer clearly superior performance in terms of wear and strength in harsh application environments.
NKE produces standard and special bearings for all industrial applications. Engineering, product development, production and final processing of components, modular assembly, quality assurance, logistics, sales and marketing are centralised at NKE’s headquarters in Steyr, Austria. The factory in Steyr is certified to ISO 9001:2008, ISO 14001:2004 and OHSAS 18001. A wide range of standard bearings is available from stock or at short production lead-times. NKE also provides tailored products and solutions. In addition to product development and application engineering NKE provides a full range of technical, consulting, documentation and training services. NKE’s products are distributed through 18 international representative offices and more than 240 distribution outlets in 60 countries.
Company information:
NKE Austria GmbH is a bearing manufacturer with headquarters in Steyr, Austria. The company with about 180 employees was founded in 1996 by a group of senior staff members of former company Steyr Wälzlager. NKE produces standard and special bearings for all industrial applications. Engineering, product development, production and final processing of components, modular assembly, quality assurance, logistics, sales and marketing – are centralised at NKE’s headquarters in Steyr, Austria. The factory in Steyr is certified to ISO 9001:2008, ISO 14001:2004 and OHSAS 18001. Its wide range of standard bearings is available from stock or at short production lead-times. NKE also provides tailored products and solutions. In addition to product development and application engineering NKE provides a full range of technical, consulting, documentation and training services. NKE’s products are distributed through 18 international representative offices and more than 240 distribution outlets in 60 countries.
Main distributor in the USA:
Ritbearing
15151 Prater Drive
Covington, GA 30014
Tel.: +1 800 431 1980
E-mail: info@ritbearing.com
Internet: www.ritbearing.com
Contact:
NKE AUSTRIA GmbH
Rene Hörwertner, Marketing
Im Stadtgut C4
A-4407 Steyr, Austria
Tel.: +43 7252 86667 435
Fax: +43 7252 86667 59
E-Mail: r.hoerwertner@nke.at
Internet: www.nke.at
(ThomasNet)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Zero-Max Load Adaptors Connect Pump Impellers in Underwater Applications
Next Aug 17 Bearing Steel Price in Different Regions of China
Next Aug 17 Bearing Steel Price in Different Regions of China
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
