Schaeffler: Collaborative Research for Magnetic Bearing Technology
Resource from: Schaeffler Technologies GmbH & Co. KG Likes:300
Jan 16,2014
Schaeffler Technologies GmbH & Co. KG has agreed on a research cooperation with the University of Applied Sciences Zittau/Görlitz. The purpose of the collaborative research is the further development of active magnetic bearing and back-up bearing technology, which is becoming increasingly important for large machinery such as steam and gas turbines and large pumps. The University of Applied Sciences Zittau/Görlitz is among the leading international scientific institutions in this sector. Schaeffler has over 30 years of experience in back-up bearing technology and, at the 2013 Hannover Fair, it presented the FAG Active Magnetic Bearing – a solution comprising a complete magnetic bearing system including rolling back-up bearings. The overall aim of the research cooperation is to increase the energy efficiency of large machinery by using more efficient innovative magnetic bearing concepts.
The first collaborative project for both partners is to set up a new testing facility at the University of Applied Sciences, which will make it possible to carry out endurance tests under environmental conditions. The aim of these tests is to experimentally examine the effects that different influencing factors have on the load carrying capacity and efficiency of magnetic and back-up bearings and to validate simulation models. The test rig will be set up by spring 2014, making the University of Applied Sciences home to the world’s most modern and extensive testing facility for magnetic bearing technology.
Over the last twenty years, the University of Applied Sciences Zittau/Görlitz has become a center for magnetic bearing technology. “The new test rig will provide magnetic bearing technology with additional momentum, which will increase energy efficiency and improve climate protection technology. For the achievement of these objectives, Schaeffler is an ideal partner", says Prof. Frank Worlitz, Head of the department Mechatronic Systems at the Institute of Process Technology, Process Automation and Measuring Technology (IPM) at the University of Applied Sciences Zittau/Görlitz. Dirk Spindler, Senior Vice President R&D Schaeffler Industrial and Member of the Management Board Schaeffler Industrial, adds that in addition to basic research, the main focus is on industrial applications, following the increasing demand for innovative bearing concepts, e.g. in the field of energy technology. “Our new magnetic bearing system has received a significant response on the market. Hence, the development of energy-efficient and cost-effective systems for further areas of application are an important element of our development strategy in the field of magnetic bearing technology”, says Spindler.
Magnetic bearing technology is used when the technological requirements can no longer be fulfilled by other bearing types. This especially applies to medium and large industrial machinery with very high rotational speeds and shaft weights of up to several tons. Typical application fields for magnetic bearings of this size include electric motors, gas and steam turbines, and compressors. Active electromagnetic bearing supports are based on the principle of a shaft that is levitated by means of regulated magnetic fields and can be made to rotate with practically no friction.
Sensors measure any deviations of the shaft from its reference position as an input variable for control and power electronics to set the necessary magnetic forces. The back-up bearings serve as a support for the rotor when the magnetic bearings are switched off. They also serve as a safety mechanism for the machine if, for example, a power failure occurs and causes the shaft to drop.
FAG Active Magnetic Bearing
With the FAG Active Magnetic Bearing, Schaeffler has developed a standardized unit comprising magnetic and back-up bearings as well as the relevant services. Schaeffler uses rolling bearings as back-up bearings that can be reused after a shaft drop. They are the result of many years of experience and expertise in the area of high-precision spindle bearings. At the same time, the use of standardized electronic control systems and power electronics from Siemens that have been proven and on the market for many years allows easy integration into the machine architecture. The objective is to develop and provide a comprehensive modular system with which both four and five-axis systems can be implemented from a single source.
(Schaeffler Technologies GmbH & Co. KG)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous United Utilities Oldham waste water plant turns to Revolvo SRB bearings
Next German Machine-tool Orders Rise in November
Next German Machine-tool Orders Rise in November
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
