Schaeffler: Innovations to shape the mobility for tomorrow
Resource from: Schaeffler Group USA Inc. Likes:308
Apr 04,2014
Schaeffler's power of innovation is also demonstrated by its number of registered patents. Schaeffler was the second most innovative company in the official patent statistics of the German Patent and Trademark Office (DPMA) with 2,100 registered new patents in 2013 (ranked fourth in previous year). However, the innovations and technologies taking center stage at the Schaeffler Symposium are more significant than these statistics. Every four years, Schaeffler provides an insight during the Symposium into its latest developments and technologies from the engine, transmission and chassis as well as hybridization and electric mobility sectors. This customer event will be taking place for the tenth time on April 3 and 4 with a record number of 810 engineers and technicians attending from the automotive industry.
Mobility for tomorrow is the central theme of this year's event. Schaeffler CTO, Prof. Peter Gutzmer will be discussing the different requirements, which are placed on mobility in different regions of the world. In addition to the company's work in research and development, a comprehensive in-house mobility study also provides a reliable basis for this discussion. "There will be a paradigm shift in the automotive industry", says Prof. Peter Gutzmer. "Issues such as increasing efficiency and advancing electrification of the powertrain, automatic and semi-automatic driving, as well as integration in information networks will define the automotive future. In addition, the variety of solutions available worldwide will become increasingly more complex, and mobility patterns will also change rapidly. However, this does not mean that cars will drive virtually in the future. Powertrains based on internal combustion engines will still dominate for a very long time and demonstrate new strengths in combination with hybrid drives. Transmissions will also gain in importance as the link between the internal combustion engine and electric motor."
At the Symposium, Schaeffler is offering solutions to questions about the automotive powertrain of the future.
Variable valve train systems, for example, are a central element for increasing the efficiency of modern internal combustion engines. Schaeffler supplies a range of different products tailored to customer requirements through to UniAir, the world's first fully-variable electrohydraulic valve control system. This system has now been extended by adding additional functions, which support state-of-the-art combustion processes and allow cylinder deactivation without a loss of comfort. CEO Automotive at Schaeffler, Prof. Peter Pleus explains: "The volume production start of UniAir technology in 2009 was the beginning of a new era in valve control systems. This fully-variable valve control system set a new technological standard for environmentally-friendly and dynamic engines, and now opens up further optimization potential for our customers by means of its expanded control strategies." In addition to the latest development stage of UniAir, Schaeffler is also presenting its ideas with regard to a rolling cylinder deactivation system and electromechanical camshaft phasing units developed to production readiness at the Symposium.
Schaeffler has products for the increasing number of plug-in hybrids
Plug-in hybrid vehicles are becoming more popular and for these cars, which are equipped with both internal combustion engines and electric motors, Schaeffler offers customized drive and transmission solutions – whether for sporty vehicles or those driven mainly in cities. Worldwide firsts are a drive integrated into the transmission with power splitting and a range-extender transmission. The latter is a three-speed transmission with an integrated electric motor, which can be combined with internal combustion engines. "This clever and cost-effective transmission design facilitates electric-powered, day-to-day driving and the best possible use of the electric and conventional drive, says CEO Automotive at Schaeffler, Norbert Indlekofer. "At the same time, we can allay any drivers' anxiety about being stuck with a flat battery."
Schaeffler also offers products for automobile manufacturers who would like to extend their existing range of powertrains based on internal combustion engines by offering a plug-in hybrid variant: For example, with an electric axle, which is specifically designed for the requirements of plug-in hybrids. A two-speed transmission is part of the drive element here. The 65-kilowatt electric motor has a significantly increased power density. The weight of the drive unit has been reduced by 41 kilograms compared to the variant in the Schaeffler ACTIVeDRIVE concept vehicle presented in 2011 and now weighs 79 kilograms. The electric axle can also be optionally equipped with a torque vectoring function, which significantly increases vehicle agility.
Increased driving pleasure and savings with 48 Volt
More economical and efficient systems for hybridization can be produced with electric drives based on a 48-volt system voltage. Schaeffler is also presenting different approaches for these systems at the Symposium. The electric drive is mounted on the rear axle, transmission or engine. 48-volt mild hybridization can achieve a fuel saving of approximately fifteen percent by means of recuperation – the recovery of energy during deceleration. In addition, such an entry-level hybridization enables electric-powered driving at low speeds and – depending on the design – also improves driving agility by means of selective torque distribution to individual wheels (so-called torque vectoring). "Currently, we are able to produce an electric drive power and recuperation capacity of up to 12 kilowatts", explains Prof. Peter Gutzmer. "This will enable a significant reduction in consumption and at moderate costs."
Maximum flexibility with customized products for efficient mobility
Schaeffler is also showing a clever and efficient approach to demonstrate how electric motors will be used in the future to compensate vibrations in the powertrain. And in the area of chassis systems, Schaeffler is driving forward the replacement of hydraulic chassis control with electromechanical systems. These include roll stabilization, ride-height control, track and camber angle adjustment as well as active damping – all of which are electromechanical systems. "We use the same modular concept for our modules and systems as the automobile manufacturers themselves" says Prof. Peter Gutzmer. They can be configured and scaled in a modular manner. This offers our customers maximum flexibility and a unique range of customized products for the efficient mobility of the future."
(Schaeffler Group USA Inc.)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Zero-Max Load Adaptors Connect Pump Impellers in Underwater Applications
Next Aug 17 Bearing Steel Price in Different Regions of China
Next Aug 17 Bearing Steel Price in Different Regions of China
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
