Schaeffler and KIT research new assisted steering system for electric vehicles (pic)
Resource from: Schaeffler Likes:272
Jun 19,2015
A collaborative project between automotive engine component and system supplier Schaeffler and the Karlsruhe Institute for Technology (KIT), Germany, is researching new technologies for improving the energy efficiency of assisted steering systems on electric vehicles.
In conventional vehicles, the internal combustion engine not only accelerates the car but also supplies power to on-board assist systems, including the assisted steering system, which reduces the strain on the driver at the wheel. In electric vehicles, this energy comes from the battery, which as a result also reduces the vehicle’s traveling range.
Set up in January 2015 and funded by the Federal Ministry for Education and Research (BMBF) to the value of approx. 600,000 euros over three years, the focus of the ‘Intelligent Assisted Steering System with Optimum Energy Efficiency for Electric Vehicles (e²-Lenk)’ project is to improve the energy efficiency of steering systems by intelligently controlling the drive torque transmitted to each of the four wheels of the vehicle.
As project managers Dr. Marcel Mayer of Schaeffler and Dr. Michael Frey of KIT explain: “The new assisted steering system would require fewer system components in an electric vehicle, which would mean savings in terms of weight and energy. This, in turn, would mean that an electric car would be cheaper and have a greater traveling range.” Due to the optimised design and weight reduction of the vehicle, savings would also be made in terms of reduced materials and vehicle production costs.
The basic idea of the e²-Lenk project is simple: the wheels in an electric car would be driven individually by electric motors, unlike a car with an internal combustion engine, where all the wheels are provided with equal force. If the wheels on the left side transmit more drive torque to the road than those on the right side, this will result in acceleration of the vehicle to the right without the need to turn the front wheels or consume additional energy for steering. Tracked vehicles or quadrocopters steer using the same principle.
“Steering assistance can be provided while driving by means of an intelligent control system and suitable wheel suspension,” says Schaeffler engineer Mayer, Manager of the Automatic Driving Working Group, which is conducting the research as part of the SHARE (Schaeffler Hub for Automotive Research in E-Mobility) collaborative research project at KIT. “Only steering when stationary remains a challenge with conventional designs.”
“With our approach, the assisted steering system is part of the drive train,” explains Dr. Frey, who is a researcher at KIT’s Institute of Vehicle Systems Technology. “Steering the front wheels is carried out without using additional energy. We also want to significantly increase the quality of driving. Customer benefit, comfort, safety and reliability go hand in hand here.”
As part of the project, functional demonstrators are being built, with which the concepts can be validated and optimised in tests. It is also planned to implement the system in last year’s Formula Student racing car built by the university group KA-RaceIng with the participation of the students.
e²-Lenk is the first publicly-funded joint project as part of the SHARE collaborative research project at KIT between Schaeffler Technologies AG & Co. KG and KIT. This joint project is being managed at KIT’s East Campus in a joint project management office run by SHARE and the Institute of Vehicle Systems Technology (FAST).
Electric Mobility Cluster
Schaeffler and KIT are partners in the Electric Mobility Cluster of Excellence Southwest (ESW), which connects over 80 stakeholders from science and economics in the Karlsruhe region of Mannheim, Stuttgart and Ulm. The cluster strategy of the ESW aims to achieve intensive regional collaboration in the field of electric mobility by means of new approaches and forms of cooperation. As a result, knowledge is developed, consolidated and ultimately advantages are achieved in global competitiveness.
For more information, please contact Schaeffler UK’s Communications & Marketing Department on info.uk@schaeffler.com.
“Steering assistance can be provided while driving by means of an intelligent control system and suitable wheel suspension,” says Schaeffler engineer Mayer, Manager of the Automatic Driving Working Group, which is conducting the research as part of the SHARE (Schaeffler Hub for Automotive Research in E-Mobility) collaborative research project at KIT. “Only steering when stationary remains a challenge with conventional designs.”
“With our approach, the assisted steering system is part of the drive train,” explains Dr. Frey, who is a researcher at KIT’s Institute of Vehicle Systems Technology. “Steering the front wheels is carried out without using additional energy. We also want to significantly increase the quality of driving. Customer benefit, comfort, safety and reliability go hand in hand here.”
As part of the project, functional demonstrators are being built, with which the concepts can be validated and optimised in tests. It is also planned to implement the system in last year’s Formula Student racing car built by the university group KA-RaceIng with the participation of the students.
e²-Lenk is the first publicly-funded joint project as part of the SHARE collaborative research project at KIT between Schaeffler Technologies AG & Co. KG and KIT. This joint project is being managed at KIT’s East Campus in a joint project management office run by SHARE and the Institute of Vehicle Systems Technology (FAST).
Electric Mobility Cluster
Schaeffler and KIT are partners in the Electric Mobility Cluster of Excellence Southwest (ESW), which connects over 80 stakeholders from science and economics in the Karlsruhe region of Mannheim, Stuttgart and Ulm. The cluster strategy of the ESW aims to achieve intensive regional collaboration in the field of electric mobility by means of new approaches and forms of cooperation. As a result, knowledge is developed, consolidated and ultimately advantages are achieved in global competitiveness.
For more information, please contact Schaeffler UK’s Communications & Marketing Department on info.uk@schaeffler.com.
(Schaeffler)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Motion Industries' Toolbox Video Demonstrates Two Ways To Install Filament Wound Bearings
Next NN, Inc. Revises 2015 Full Year Revenue Based On Brazilian Economic Outlook, Reaffirms Commitment To 2018 Strategic Plan Targets
Next NN, Inc. Revises 2015 Full Year Revenue Based On Brazilian Economic Outlook, Reaffirms Commitment To 2018 Strategic Plan Targets
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
