GGB’s HPMB™ Bearings Approved for use in Hydropower Turbines
Resource from: GGB Bearing Technology Likes:231
Jul 28,2015
THOROFARE, N.J.--(BUSINESS WIRE)--
The U.S. Army Corps of Engineers (USACE) has approved GGB Bearing Technology’s new HPMB™ filament wound bearings for use in hydropower turbine wicket gates. The approval is based on simulation testing performed by Powertech Labs.
Conducted in April 2015 in accordance with USACE specifications, the testing simulated the operating conditions of a wicket gate in a Francis turbine. Test results showed an extremely low stick-slip effect, indicating smooth operation of the regulating mechanism in a turbine, as well as a low wear rate with no visible bearing damage in wet, dry or edge testing.
According to the test report, “The dynamic and static coefficients of friction were quite close to each other, which indicates a smooth end of stroke direction reversal. The test ran smoothly and quietly and the coefficients of friction remained stable for the duration of the test. Overall the bearing was in excellent condition…the wear rate was exceptionally low.”
In addition, HPMB™ offers high load bearing capacity, plus excellent resistance to shock and misalignment and dimensional stability in water. It is also the best performing bearing material under conditions that include dithering -- the high frequency, small angle oscillations present in turbine operation.
HPMB™ features a machinable liner that provides tight dimensional control and class-leading tribological properties for hydropower applications. Post-installation ID machining allows IT7 diametrical tolerance to be achieved with improved concentricity and cylindricity. Liners can be machined with commercially available inserts.
HPMB™ bearings are available in three configurations: finished by GGB and ready for installation; finished OD and length and ready for end-user ID machining prior to installation; and finished OD and length and ready for end-user ID machining after installation. The last two configurations are valid for refurbishing turbines by OEMs that do not know exact component dimensions and tolerances.
HPMB™ bearings are available in ID sizes up to 500 mm and various wall thicknesses. For more information contact Yuri Klepach at yuri.klepach@ggbearings.com or marketing@ggbearings.com.
View source version on businesswire.com: http://www.businesswire.com/news/home/20150727005840/en/
(GGB Bearing Technology)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Federal-Mogul Powertrain Technologies at the Heart of Success in the 2015 International Engine of the Year Awards
Next RBC Bearings to Webcast First Quarter Fiscal Year 2016 Results
Next RBC Bearings to Webcast First Quarter Fiscal Year 2016 Results
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
