Moventas’ Exceed gearbox testing surpassed expectations
Testing of the first prototypes of Moventas' Exceed high-torque platform gearbox offer better than expected results.
Testing of the first prototypes of Moventas’ Exceed high-torque platform gearbox provided better than expected results.
Moventas has set a new performance standard in the onshore 3-MW turbine gearbox class. Testing and verification procedures of the first prototypes of an Exceed high-torque platform gearbox have been completed, and the results are even better than estimated.
Launched in August 2014, the Exceed is a 3 MW and up product platform with the best weight/nominal torque ratio in the market. The Exceed provides 20% more torque density with 10% less size and consists of 100% proven Moventas technology. Testing and verification showed that torque density improvement was even more significant than expected, exceeding 140 Nm/kg.
“We took measured gearbox values of the technology we’ve been using for a decade and recalculated them with new design methods. As a result, one gets more torque out of a smaller and more lightweight gearbox. This positively affects the levelized cost of wind energy,” commented Moventas’ CTO Jyrki Virtanen.
In addition to the superior torque density, the Exceed’s other major improvements contributing to turbine competitiveness are lower weight, smaller size, and best-in-class noise and vibration behavior. Compared to a conventional Moventas 3-MW gearbox, the Exceed is nearly 4.5 tons lighter, weighing under 20 tons. Despite the lighter weight no quality compromises have been made.
The Exceed’s overall noise levels are quieter on both partial and nominal powers. Its maximum vibration level is half the level of a conventional 3-MW gearbox. In addition to the increased performance, tests also showed improved reliability.
Supervised by a classification body, Moventas finished the successful prototype verification process two weeks ago. Serial deliveries of the Exceed will begin in Q1/2016 for two OEM customers from Moventas’ highly modern MMW wind gearbox factory in Finland.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next Aug 17 Bearing Steel Price in Different Regions of China
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
