NTN has received an order to mass produce the “Low Torque Seal Ring” for automotive transmissions
Resource from: NTN Corporation Likes:225
Mar 29,2016
NTN Corporation (hereafter, NTN) has received an order to mass produce the “Low Torque Seal Ring” developed for use on automotive transmissions from several automotive manufacturers and automotive parts manufacturers. This is due to the fact that achieving a low torque is valued as fuel efficiency standards for automobiles are increasingly severe.
From four to 10 seal rings are installed on a single transmission between the shaft and housing that move in relative motion within the oil hydraulic circuits. The seal rings serve to seal the oil as they slide. Since friction occurs when they slide, nowadays it has become an issue for the seal rings to be made low torque as one of the parts that affects fuel efficiency.
The “Low Torque Seal Ring” for which we received the current mass production order (it is an injection molded part of width 1.5 mm and outer diameter of 15 to 60 mm) is made from PEEK (polyether ether ketone) plastic featuring a special filler. By forming a V-shaped lubrication groove on the side surface that slides and moves, oil is reliably supplied by the dynamic pressure effect and achieves a low torque that is 60% lower compared to NTN's conventional products. Furthermore, in terms of its seal characteristics, while maintaining the same performance, the amount of wear on the seal ring is 1/10th or less compared to conventional products due to it being low torque.
After announcing* this developed product in 2014, NTN has made proposals for the market, received acknowledgement of its performance from customers and this had led to receiving the order for mass production. In order to increase energy transfer efficiency, multi-staged automotive transmissions that have many gear stages are increasing and there is a tendency to also increase the number of seal rings in use within automotive transmissions it is expected an increase in the demand for this developed product which achieves low torque.
NTN is contributing to improved automotive fuel efficiency through technical proposals with this developed product.
* 2014 Press release
http://www.ntn.co.jp/english/news/new_products/news201400011.html
Features
Compared to conventional products (rectangular cross-section shape)
Product photo
Example of application
Comparison of features various seal rings
Product photo
Example of application
Comparison of features various seal rings
(NTN Corporation)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous RKB at BAUMA 2016 in Munich
Next Trelleborg Launches Unrivalled Compact Double-Acting Piston Seal
Next Trelleborg Launches Unrivalled Compact Double-Acting Piston Seal
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
