Electromechanical active roll control system made by Schaeffler wins German Innovation Award
Resource from: Schaeffler Likes:184
Apr 12,2016
Automotive and industrial supplier Schaeffler has been presented with the “2016 German Innovation Award“ in the “large companies” category for its innovation and development of an active electromechanical roll control system. The awards ceremony was held on April 8 in Munich.
Prof. Peter Pleus, CEO Automotive Schaeffler AG, says: “Schaeffler has a tradition of being the most innovative company in Germany. This is also documented by the latest figures with more than 2,300 patent applications in 2015. The electromechanical active roll control system convinced the high-profile German Innovation Awards committee of our innovative capacity. The product adds to Schaeffler’s range of electromechanical actuators that provide significant contributions to power and efficiency in automobiles.”
The electromechanical active roll control system
Schaeffler’s volume production of the electromechanical active roll control system has opened up a new chapter in chassis technology. This technology adjusts the chassis to any driving situation as quick as a flash and absorbs irregularities in the road, thus minimizing the vehicle’s rolling motions. This increases comfort, safety and dynamics. The innovation helps reduce fuel consumption and emissions compared to hydraulic systems and simplifies assembly in automotive manufacturers’ production plants. The first large-scale application for the electromechanical active roll control system was in a luxury class sedan as well as in the powerful and dynamic luxury SUV class. The latter even included a 48-volt electric system.
Details
Schaeffler‘s electromechanical active roll control system consists of a gearbox and a control motor with an electronic system as well as an integrated torque sensor. The control motor with its high-ratio, three-stage planetary gearbox twists the two halves of the roll control in opposite directions to produce a torque that has a stabilizing effect on the vehicle body. The torque is measured precisely by means of a non-contact torque sensor and used to regulate the actuator quickly and precisely. To increase comfort, the Schaeffler solution also includes an innovative decoupling element made of high-strength elastomer. Fast data transmission and a state-of-the-art software architecture also allow the system to be used in networked driving applications.
Unlike hydraulic systems, electromechanical active roll control only uses electric power on an as-needed basis (“power on demand”). One of the key factors here is the electric motor, which only consumes power when the swivel actuator twists and builds up torque. Only a relatively low electrical loss of resistance has to be compensated to maintain the moment. Schaeffler has installed two state-of-the-art production lines at its Schweinfurt location for the volume production launch of the new system, making a conscious decision to stay in step with innovations in Germany. The facilities have a modular design in accordance with Industrie 4.0 criteria. This will allow subsequent product launches and future, refined generations of this technology to be integrated without any problems.
The German Innovation Award
Accenture, EnBW, Evonik and WirtschaftsWoche magazine established the “German Innovation Award“ initiative in 2010 to recognize outstanding, trend-setting innovations by German companies whose innovative capacity changes business and markets. The group is in under the auspices of the German Federal Ministry for Economic Affairs and Energy. The German Innovation Award is organized by the Handelsblatt publishing group.
Prof. Peter Pleus, CEO Automotive Schaeffler AG, says: “Schaeffler has a tradition of being the most innovative company in Germany. This is also documented by the latest figures with more than 2,300 patent applications in 2015. The electromechanical active roll control system convinced the high-profile German Innovation Awards committee of our innovative capacity. The product adds to Schaeffler’s range of electromechanical actuators that provide significant contributions to power and efficiency in automobiles.”
The electromechanical active roll control system
Schaeffler’s volume production of the electromechanical active roll control system has opened up a new chapter in chassis technology. This technology adjusts the chassis to any driving situation as quick as a flash and absorbs irregularities in the road, thus minimizing the vehicle’s rolling motions. This increases comfort, safety and dynamics. The innovation helps reduce fuel consumption and emissions compared to hydraulic systems and simplifies assembly in automotive manufacturers’ production plants. The first large-scale application for the electromechanical active roll control system was in a luxury class sedan as well as in the powerful and dynamic luxury SUV class. The latter even included a 48-volt electric system.
Details
Schaeffler‘s electromechanical active roll control system consists of a gearbox and a control motor with an electronic system as well as an integrated torque sensor. The control motor with its high-ratio, three-stage planetary gearbox twists the two halves of the roll control in opposite directions to produce a torque that has a stabilizing effect on the vehicle body. The torque is measured precisely by means of a non-contact torque sensor and used to regulate the actuator quickly and precisely. To increase comfort, the Schaeffler solution also includes an innovative decoupling element made of high-strength elastomer. Fast data transmission and a state-of-the-art software architecture also allow the system to be used in networked driving applications.
Unlike hydraulic systems, electromechanical active roll control only uses electric power on an as-needed basis (“power on demand”). One of the key factors here is the electric motor, which only consumes power when the swivel actuator twists and builds up torque. Only a relatively low electrical loss of resistance has to be compensated to maintain the moment. Schaeffler has installed two state-of-the-art production lines at its Schweinfurt location for the volume production launch of the new system, making a conscious decision to stay in step with innovations in Germany. The facilities have a modular design in accordance with Industrie 4.0 criteria. This will allow subsequent product launches and future, refined generations of this technology to be integrated without any problems.
The German Innovation Award
Accenture, EnBW, Evonik and WirtschaftsWoche magazine established the “German Innovation Award“ initiative in 2010 to recognize outstanding, trend-setting innovations by German companies whose innovative capacity changes business and markets. The group is in under the auspices of the German Federal Ministry for Economic Affairs and Energy. The German Innovation Award is organized by the Handelsblatt publishing group.
(Schaeffler)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Schaeffler UK plant achieves ISO 50001 Energy Management accreditation
Next Lewmar launches CE certified over-side work rail system
Next Lewmar launches CE certified over-side work rail system
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
