KBB Turbochargers once again ready to meet you at SMM
Resource from: KBB Turbochargers Likes:190
Jul 29,2016
KBB is one of the leading turbocharger manufacturers that will be showcasing its ST7 and K2B turbocharging solutions to the maritime market at SMM (hall A3 booth 102).
The shipbuilding industry currently stands in a state of crisis with questions looming over what will be the future and what actions can be done. KBB recognises that the maritime engine world is on a technological crossroads with many options on the market for owners. The question lingers of what technology will be the winner: two stage turbocharging, SCR or EGR?
One of the products that KBB will be showing is its ST7 cartridge from its ST range. The ST range with radial compressor has been designed for an engine output between 500 and 4,800kW per unit at a maximum pressure ratio of 5.5, development of the ST range begun in 2008 and its now showcasing its 7th generation of turbochargers produced by KBB. KBB also adds that it is further developing an update to its ST range, which will reach a maximum pressure ratio 6,0: 1.
K2B ‘Knowledge to Boost’ two-stage turbocharging system.
The ST series has a high efficiency and pressure ratio. It also features inboard journal bearings and is lubricated by the engine oil system. The oil is supplied through the turbo support. The ST series also allows for speed measurements and is interchangeable with the HPR-generation and can be installed on engines up to 4.8MW. With extended area in the top efficiency, reductions in emissions can be achieved (to support IMO II requirements).
The ST series is a simple and compact design, which offers customers long intervals between overhauls and a long lifetime of components.
KBB will also be exhibiting a scale model of its more recent K2B ‘knowledge to boost’ two-stage turbocharging system. The model consists of the HPA7000 and one HSR6; the HSR6 is a high-pressure turbocharger (2nd stage) with the HPA7000, the larger of the two units, is a low-pressure turbocharger (1st stage). The K2B range is the 8th generation of turbochargers produced by KBB.
Dr. Roman Drozdowski – KBB Managing Director
The K2B can be used on different L- and V-engines (diesel, HFO, gas). The two-stage turbocharging with K2B can be applied to engines with outputs between 0.5 and 5MW and has an overall compressor pressure ratio of up to 10:1.
2014 saw the first series application of the K2B two-stage turbocharger on a Yanmar 6-cylinder main propulsion MDO/HFO engine with a significant reduction of fuel, the company says.
Dr. Roman Drozowski, Managing Director, Mr. Reinhard Ernst, Marketing Director, Mr. Klaus Buchmann, Director Engineering from KBB will also be on the KBB stand to talk about the ST series, K2B and KBB range of turbocharging options.
ST7, the 7th generation of turbos which are produced by KBB.
KBB turbochargers are suitable for two- and four-stroke diesel and gas engines in the power range 500 – 4,800 kW per turbo. At present, turbochargers with radial turbines (ST-, HPR- and R-types) and axial turbines (M-type) are manufactured. Design characteristics of the compact turbochargers are inboard plain bearings; water-cooled and uncooled bearing housings. Monitoring performance by processing the measured values electronically on test benches and 3D CMM technology are also used to guarantee precision. KBB is certified by ISO 9001.
The turbochargers are developed in KBB’s own R&D department using modern CAD-technology and software tools for aero design, thermodynamic, strength, bearing design and vibrations. KBB ensures high quality by applying CNC-technology when working on functional components.
KBB [Kompressorenbau Bannewitz], Germany, looks back on the vast experience gathered by seven generations in the development and manufacturing of turbochargers. The company has found its market among the diesel and gas engine manufactures with applications in the marine, locomotive and industrial engineering. More than 60.000 turbochargers have already left the production facility in Bannewitz.
K2B ‘Knowledge to Boost’ two-stage turbocharging system.
The ST series has a high efficiency and pressure ratio. It also features inboard journal bearings and is lubricated by the engine oil system. The oil is supplied through the turbo support. The ST series also allows for speed measurements and is interchangeable with the HPR-generation and can be installed on engines up to 4.8MW. With extended area in the top efficiency, reductions in emissions can be achieved (to support IMO II requirements).
The ST series is a simple and compact design, which offers customers long intervals between overhauls and a long lifetime of components.
KBB will also be exhibiting a scale model of its more recent K2B ‘knowledge to boost’ two-stage turbocharging system. The model consists of the HPA7000 and one HSR6; the HSR6 is a high-pressure turbocharger (2nd stage) with the HPA7000, the larger of the two units, is a low-pressure turbocharger (1st stage). The K2B range is the 8th generation of turbochargers produced by KBB.
Dr. Roman Drozdowski – KBB Managing Director
The K2B can be used on different L- and V-engines (diesel, HFO, gas). The two-stage turbocharging with K2B can be applied to engines with outputs between 0.5 and 5MW and has an overall compressor pressure ratio of up to 10:1.
2014 saw the first series application of the K2B two-stage turbocharger on a Yanmar 6-cylinder main propulsion MDO/HFO engine with a significant reduction of fuel, the company says.
Dr. Roman Drozowski, Managing Director, Mr. Reinhard Ernst, Marketing Director, Mr. Klaus Buchmann, Director Engineering from KBB will also be on the KBB stand to talk about the ST series, K2B and KBB range of turbocharging options.
ST7, the 7th generation of turbos which are produced by KBB.
KBB turbochargers are suitable for two- and four-stroke diesel and gas engines in the power range 500 – 4,800 kW per turbo. At present, turbochargers with radial turbines (ST-, HPR- and R-types) and axial turbines (M-type) are manufactured. Design characteristics of the compact turbochargers are inboard plain bearings; water-cooled and uncooled bearing housings. Monitoring performance by processing the measured values electronically on test benches and 3D CMM technology are also used to guarantee precision. KBB is certified by ISO 9001.
The turbochargers are developed in KBB’s own R&D department using modern CAD-technology and software tools for aero design, thermodynamic, strength, bearing design and vibrations. KBB ensures high quality by applying CNC-technology when working on functional components.
KBB [Kompressorenbau Bannewitz], Germany, looks back on the vast experience gathered by seven generations in the development and manufacturing of turbochargers. The company has found its market among the diesel and gas engine manufactures with applications in the marine, locomotive and industrial engineering. More than 60.000 turbochargers have already left the production facility in Bannewitz.
(KBB Turbochargers)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous New at Summit Racing Equipment: Back in Black Nighthawk LS 408 Parts Combos
Next Timken Names Brett Blauner As National Sales Manager For Automotive Aftermarket – Light Vehicle
Next Timken Names Brett Blauner As National Sales Manager For Automotive Aftermarket – Light Vehicle
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
