Flywheel storage pilots in Philippines and Hawaii
Resource from: Windpower Monthly Likes:257
Nov 18,2016
PHILIPPINES: Amber Kinetics, a US developer of a multi-hour flywheel energy storage system, is piloting its technology in the Philippines and Hawaii.
US firm Amber Kinetics is trialling its flywheel storage solution at sites in the Philippines and Hawaii
In the Philippines, Amber Kinetics is working with local independent power producer Emerging Power, a subsidiary of mining firm Nickel Asia Corporation. A single flywheel with a capacity of 6.25/25kWh was installed earlier this month.
The pilot project will be used to integrate generation from a 150MW wind and solar photovoltaic (PV) project Emerging Power built earlier this year near Subic Bay, in the north-west of the country.
Amber Kinetics also has a memorandum of understanding (MoU) with Emerging Power for a 10MW/40MWh flywheel energy storage system, should the pilot prove successful, which will smooth the variability of solar and wind into the transmission system.
Flywheel energy storage works by rotating steel rotors at extremely high speeds, to store kinetic energy, which can be discharged when required.
Flywheels can be cycled — the charging up and releasing of energy — many thousands of times, with little degradation, unlike cells in lithium batteries, which degrade after a few thousand cycles.
"Maintenance consists of changing bearings, about every ten years, which are easily accessible to swap out," said Amber Kinetics vice president of project development, Mark Stout.
Hawaii
The California-based start-up is also shipping one of its flywheels to a project for utility Hawaiian Electric, which will be built at the Campbell Industrial Park generating station on O'ahu.
"The pilot will show that we've got the technology down and can scale up," Stout said.
Hawaiian Electric will use the flywheel to test a number of storage applications, which have yet to be finalised.
To develop its multi-hour flywheel the company has achieved a low dollar per kilowatt cost and low self-discharge rate. Researchers performed early technology and prototype development work at the University of California, Berkeley Power Electronics Laboratory.
The start-up's largest deal to date is a contract with Pacific Gas & Electric (PG&E) for 20MW of flywheel energy storage. The system will start to be installed in 2019, to be fully operational in 2020.
The contract with Amber Kinetics forms a portion of the 75MW of energy storage the Californian utility is procuring as part of its 580MW share of the 1.3GW energy storage mandate imposed by the state's public utilities commission.
US firm Amber Kinetics is trialling its flywheel storage solution at sites in the Philippines and Hawaii
In the Philippines, Amber Kinetics is working with local independent power producer Emerging Power, a subsidiary of mining firm Nickel Asia Corporation. A single flywheel with a capacity of 6.25/25kWh was installed earlier this month.
The pilot project will be used to integrate generation from a 150MW wind and solar photovoltaic (PV) project Emerging Power built earlier this year near Subic Bay, in the north-west of the country.
Amber Kinetics also has a memorandum of understanding (MoU) with Emerging Power for a 10MW/40MWh flywheel energy storage system, should the pilot prove successful, which will smooth the variability of solar and wind into the transmission system.
Flywheel energy storage works by rotating steel rotors at extremely high speeds, to store kinetic energy, which can be discharged when required.
Flywheels can be cycled — the charging up and releasing of energy — many thousands of times, with little degradation, unlike cells in lithium batteries, which degrade after a few thousand cycles.
"Maintenance consists of changing bearings, about every ten years, which are easily accessible to swap out," said Amber Kinetics vice president of project development, Mark Stout.
Hawaii
The California-based start-up is also shipping one of its flywheels to a project for utility Hawaiian Electric, which will be built at the Campbell Industrial Park generating station on O'ahu.
"The pilot will show that we've got the technology down and can scale up," Stout said.
Hawaiian Electric will use the flywheel to test a number of storage applications, which have yet to be finalised.
To develop its multi-hour flywheel the company has achieved a low dollar per kilowatt cost and low self-discharge rate. Researchers performed early technology and prototype development work at the University of California, Berkeley Power Electronics Laboratory.
The start-up's largest deal to date is a contract with Pacific Gas & Electric (PG&E) for 20MW of flywheel energy storage. The system will start to be installed in 2019, to be fully operational in 2020.
The contract with Amber Kinetics forms a portion of the 75MW of energy storage the Californian utility is procuring as part of its 580MW share of the 1.3GW energy storage mandate imposed by the state's public utilities commission.
(Windpower Monthly)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous LTN Offers New Mercury-Free Slip Ring
Next CeramicSpeed acquires U.S. test lab Friction Facts
Next CeramicSpeed acquires U.S. test lab Friction Facts
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
