DSD Contributes to Magnetic Gearbox for Hydropower Applications
Resource from: DSD Contributes to Magnetic Gearbox for Hydropower Applications Likes:211
Apr 17,2017
Driveline engineering specialist, Drive System Design (DSD), is contributing to two innovative hydropower projects in the United States by developing an existing magnetic gearbox concept for turbine generator applications. Pioneer of the concept, Emrgy Inc., has commissioned DSD to evolve its 10 kW proof-of-concept unit into a second generation design engineered for minimal maintenance.
Following the initial success, DSD has been further commissioned to scale up the concept to 100 kW in a parallel program, part-funded by the U.S. Department of Energy. The aim is to broaden the range of applications with DSD simulations demonstrating the potential for further enlargement to more than 500 kW.
Emrgy is an Atlanta based start-up company with proprietary technologies including an axial flux, cycloidal magnetic gear concept used, in this instance, to connect a water-driven turbine to a generator. The system is able to extract energy that would otherwise be wasted from slow-flowing, low-head applications and is completely carbon-free.
“The magnetic gearbox concept makes environmentally sensitive hydro applications feasible because it significantly reduces the risk of water pollution that could arise from the lubricants used in a conventional gearbox,” explained Tony Walsh, vice president at DSD Inc., Michigan. “The only lubricant required is for the bearings, and for this we use FDA-approved grease and bearings from the food industry. This allows the system to be used safely, even in drinking water treatment facilities or aqueducts.”
The 10 kW production unit designed by DSD has a 60 rpm input speed with a 30:1 step-up ratio to the output and uses a 16 inch (0.41 m) diameter rotor. The initial concept was determined by the available water flow and channel width of the first intended application.
DSD worked alongside Emrgy to refine and develop the initial concept through to the first production unit. This phase of the project involved a rigorous assessment of the technology’s boundaries and the development of innovative magnetic arrangements that enabled the reduction in gearbox size. DSD’s simulation led approach facilitated the development of design, analysis and life calculations to a 10 year duty cycle. The DoE-supported program for the 100 kW unit began in February 2016 and has successfully met the requirements stipulated in phase 1. Phase 2, build and test, has been approved and is about to commence.
DSD has re-sized the design with a rotor of 39 inches (1.0 m) diameter achieving a 10x yield in performance, with a 2x increase in diameter. Because the design has relatively few moving parts, it offers a reliable, low cost solution yet can provide a very long life with limited scheduled maintenance.
“Hydropower already supplies approximately seven percent of America’s electricity and this could be significantly extended by the use of environmentally friendly technologies such as the magnetic gearbox,” said Walsh. “Alternative applications, such as waste water treatment facilities, are already being discussed.”
(DSD Contributes to Magnetic Gearbox for Hydropower Applications)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous KUSE X-life: a new performance class among linear recirculating ball bearing and guideway assemblies
Next BOWMAN ACQUIRES JOHN HANDLEY BEARINGS
Next BOWMAN ACQUIRES JOHN HANDLEY BEARINGS
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
