Endress+Hauser Liquiline To Go Portable Monitors
Endress+Hauser releases Liquiline To Go CYM290 and CYM291 portable handheld multiparameter monitors for use with analog and digital sensors. Each device automatically detects when any Memosens sensor is connected and switches to the appropriate measured variable. By simply plugging a Memosens sensor into the monitor, a technician can measure conductivity, ORP, pH or oxygen. The battery-powered monitor also displays sensor type, serial number, zero point, slope and date of calibration for the sensor.
Liquiline To Go monitors permit a technician to enter a process area, connect the monitor into any Memosens sensor, read the measured value, transfer all data into the monitor, and calibrate the sensor. This can be especially useful when installing new sensors in the process, when conducting regular maintenance checks, or when performing calibrations in the measuring laboratory. Performing these operations with a Liquiline To Go monitor guarantees full data consistency because it allows the use of the same measuring technology in the laboratory and in the process.
pH, ORP, conductivity and oxygen sensors from Endress+Hauser with Memosens technology have integrated electronics that allow for saving calibration data, total hours of operation, and operating hours under extreme measuring conditions. Once the sensor has been connected to the Liquiline To Go monitor, this data is transferred automatically to the portable monitor and used to calculate the measured value. Because calibration data is stored in the sensor, the sensor can be calibrated and adjusted independently of the measuring point. Data transferred to the monitor can be downloaded into a maintenance management program for further analysis.
Memosens is an inductive, non-contact connection used to connect the sensor to the monitor for maximum process safety. The non-contact connection also eliminates moisture and corrosion issues, and even allows the monitor to be connected under water. The CYM291 monitor is IECEx and ATEX certified for use in hazardous areas up to Ex Zone 0, and both models have IP66/67 ingress protection with pressure compensation.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next New Hydra-Cell D10 seal-less pumps with higher discharge pressure rating
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
