New Light- And Heavy-Duty Knitted Mesh Vibration Mounts From AAC
Two new series of base-mounted stainless steel
knitted mesh vibration mounts introduced by Advanced Antivibration Components are designed for marine, aerospace and machine shop applications where corrosive environments could cause conventional isolation materials to fail or operate at reduced efficiency.
The stainless steel springs and resilient knitted pads are unaffected by oil, water, ozone, bacteria,corrosion, or temperature extremes (no efficiency change occurs between -94 degrees F and +347 degrees F (-70 degrees C to +175 degrees C).
The V10Z22 Series light-duty mount are designed for marine, aircraft and other mobile applications and conform to MIL-5400C military specification.
The series consists of many different mounts
ranging in static load capacities from 1.55 to 132.30 lbs. (0.7 to 60 kg), and mounting configurations 1/4-20 to 3/8-24. The units are constructed of stainless steel springs and resilient mesh pads which are enclosed in an
aluminum alloy housing.
Dynamic characteristics include a ratio between transverse and axial (vertical) stiffness of approximately 1:2.5. Their natural frequency is equal to 7 to 10 Hz vertical and 4.5 to 6 Hz
transverse, depending on load, for a displacement of +/-0.030" (0.75 mm).
Transmissibility is less than or equal to 4:1. Units have a free height of 1-27/32" (46.3 mm) with a base dimension of 2-3/8" sq (60.5 mm sq). Unit weights range from 3.53 to 4.41 oz (100-125 g.
The V10Z28 heavy-duty mounts are designed for
machine tools, motors, generator sets, printing presses, textile machinery and pumps. This series consists of six different mounts ranging in static load capacities from 10-1,000 lbs. (4.55 to 453.5 kg). The natural frequency of the units are 13-17 Hz for an amplitude of +/-0.012"(+/-.3 mm).
The material used is knitted stainless steel mesh. Aluminum alloy coated with Alochrome 1200 is used for the housings.Unit free height is
1.91" of 1.44" (36.6 mm). Base dimensions are 3" sq. (76.2 mm sq). Unit weight is 6.33 oz (180g).
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next Frenco Adds Gage for Measuring Splines to Produce A Circumferential Backlash Measuring Instrument
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
