Structural Design from LBCN of Deep Groove Ball Bearings

Deep Groove Ball Bearings from LBCN

Bearings are common components in machines. Bearing disassembly is a common operation in machine maintenance. Due to the wide variety of bearing types and specifications, the bearing removal tools used are also different. Because of the need for disassembly work, the maintenance personnel also designed a variety of disassembly pullers, such as ordinary three-claw pullers, special pullers for dismantling bearings with spring grooves, etc. Due to the large size of the jaws, the three-jaw puller needs to occupy a large space during disassembly, so its use is limited by the space conditions of the machine installation. Due to the small space of the bearings in some machines, ordinary pullers cannot pull out the bearings. Some bearings are difficult to disassemble due to corrosion, damage and other reasons. Considering that many bearings in bearing maintenance will be replaced with new ones after they are disassembled, and the disassembled bearings are no longer used.

Deep groove ball bearings are widely used in machines, and it is very common to replace bearings during maintenance. For some machines, the bearings cannot be removed by ordinary pullers due to structural limitations. At the same time, most of the removed bearings are not in use during maintenance, and destroying the old bearings will not increase the maintenance cost. This makes destructive removal of bearings an option for repairs, and the use of this destructive removal puller facilitates quick removal of such bearings. 

It provides convenience for machine maintenance and greatly improves the efficiency of maintenance work. Therefore, for the manufacturers of deep groove balls, we are confident to bring the best products and services to customers.