Mounting and dismounting and precautions of the pillow block bearing
Resource from: https://www.bearing.cn/ Likes:161
May 19,2022
Pillow block bearings consist of an outer spherical ball bearing with seals on both sides and a cast (or steel plate stamped) bearing seat. On the contrary, the pillow block bearing has a compact structure, but it is easy to load and unload, and the sealing is also perfect. It is often used in mining, metallurgy, agriculture, chemical industry, textile, printing and dyeing, conveying machinery, etc.
Installation steps and precautions for the pillow block bearings:
1. Before installing the bearing on the shaft, the fixing pin of the bearing jacket must be pulled out first, and the surface of the journal must be polished smooth and clean, and the journal should be oiled to prevent rust and lubricate (allow the bearing to rotate slightly on the shaft).
2. Apply lubricating oil on the mating surface of the bearing seat and the bearing, and install the bearing into the bearing seat. Then put the assembled bearing on the shaft together with the bearing seat. Push to the desired location for installation.
3. Do not tighten the bolts that fix the bearing seat first, so that the bearing shell can rotate in the bearing seat. Also install the bearing and seat on the other end of the same shaft, turn the shaft a few times, and let the bearing itself find the correct position automatically. Re-tighten the bearing housing bolts.
4. Install eccentric sleeve. First put the eccentric sleeve on the eccentric step of the inner sleeve of the bearing, and tighten it by hand along the rotation direction of the shaft. Then insert the small iron rod into or against the countersunk hole on the eccentric sleeve. Hit the small iron rod with a hammer in the direction of rotation of the shaft. Install the eccentric sleeve firmly, and finally tighten the hexagon socket head cap screw on the eccentric sleeve.
Disassembly steps and precautions for the pillow block bearings:
1. First loosen the locking screw on the bearing eccentric sleeve with an Allen wrench, then insert a small iron rod into the countersunk hole on the top cover eccentric sleeve, and loosen the eccentric sleeve against the rotation direction of the shaft.
2. Loosen the bolts that fix the bearing seat. Remove the bearing from the shaft with the bearing housing. Take care before removing the bearing housing at one end of the shaft. The bearing seat bolt on the other end of the shaft should be loosened to avoid damage to the bearings at both ends.
(https://www.bearing.cn/)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous 2022 April-May highly credible star supplier member on BearingNet , CBCC and related
Next One of the installation faults of the tapered roller bearing-the rib of the bearing broken
Next One of the installation faults of the tapered roller bearing-the rib of the bearing broken
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
