Basic production process of rolling bearings
Resource from: https://www.bearing.com.cn/ Likes:130
Jun 10,2022
Due to the different types, structures, tolerance levels, technical requirements, materials and batches of rolling bearings, their basic production processes are not exactly the same. LBCN Bearing will show something about the process of rolling bearing.
1. The processing process of the ferrule: The processing of the inner ring and the outer ring of the bearing varies depending on the raw material or the form of the blank. The processes before turning can be divided into the following three types. The whole processing process is: Bar or tube (Some bars need to be forged, annealed and normalized) ---- turning processing ---- heat treatment ---- grinding processing ---- fine grinding or polishing ---- final inspection of parts ---- Anti-rust----storage----(to be assembled together).
2. The processing process of steel balls, the processing of steel balls also varies according to the state of the raw materials. Among them, the process before filing or light balling can be divided into the following three types, and the process before heat treatment can be divided into the following three types: Two, the whole processing process is: cold punching of bar or wire (some bars need to be punched and annealed after cold punching) ---- file, rough grinding, soft grinding or light ball ---- heat treatment- ---Hard grinding---fine grinding---fine grinding or grinding---final inspection grouping---anti-rust, packaging---warehousing <to be assembled in a set>.
3. The processing process of the rollers The processing of the rollers varies according to the raw materials. The processes before heat treatment can be divided into the following two types. The whole processing process is: bar car processing or wire rod cold heading, string ring belt and soft grinding ----heat treatment----string soft spot----coarse grinding outer diameter----coarse grinding end face----final grinding end face----fine grinding outer diameter----final grinding outer diameter ----Final inspection grouping----Anti-rust, packaging----warehousing (to be assembled in a set).
4. The machining process of the cage The machining process of the cage can be divided into the following two categories according to the design structure and raw materials.
(1) Sheet material shearing punching stamping forming shaping and finishing pickling or shot peening or stringing final inspection rust prevention, packaging storage (to be assembled together).
(2) The processing process of the solid cage: The processing of the solid cage varies according to the raw materials or the damage. Among them, it can be divided into the following four blank types before turning. The whole processing process is: bar, Tube materials, forgings, castings ---- inner diameter, outer diameter, end face, chamfering ---- drilling (or pulling hole, boring) ---- pickling ---- final inspection ---- Anti-rust, packaging - warehousing <to be assembled in a set>.
1. The processing process of the ferrule: The processing of the inner ring and the outer ring of the bearing varies depending on the raw material or the form of the blank. The processes before turning can be divided into the following three types. The whole processing process is: Bar or tube (Some bars need to be forged, annealed and normalized) ---- turning processing ---- heat treatment ---- grinding processing ---- fine grinding or polishing ---- final inspection of parts ---- Anti-rust----storage----(to be assembled together).
2. The processing process of steel balls, the processing of steel balls also varies according to the state of the raw materials. Among them, the process before filing or light balling can be divided into the following three types, and the process before heat treatment can be divided into the following three types: Two, the whole processing process is: cold punching of bar or wire (some bars need to be punched and annealed after cold punching) ---- file, rough grinding, soft grinding or light ball ---- heat treatment- ---Hard grinding---fine grinding---fine grinding or grinding---final inspection grouping---anti-rust, packaging---warehousing <to be assembled in a set>.
3. The processing process of the rollers The processing of the rollers varies according to the raw materials. The processes before heat treatment can be divided into the following two types. The whole processing process is: bar car processing or wire rod cold heading, string ring belt and soft grinding ----heat treatment----string soft spot----coarse grinding outer diameter----coarse grinding end face----final grinding end face----fine grinding outer diameter----final grinding outer diameter ----Final inspection grouping----Anti-rust, packaging----warehousing (to be assembled in a set).
4. The machining process of the cage The machining process of the cage can be divided into the following two categories according to the design structure and raw materials.
(1) Sheet material shearing punching stamping forming shaping and finishing pickling or shot peening or stringing final inspection rust prevention, packaging storage (to be assembled together).
(2) The processing process of the solid cage: The processing of the solid cage varies according to the raw materials or the damage. Among them, it can be divided into the following four blank types before turning. The whole processing process is: bar, Tube materials, forgings, castings ---- inner diameter, outer diameter, end face, chamfering ---- drilling (or pulling hole, boring) ---- pickling ---- final inspection ---- Anti-rust, packaging - warehousing <to be assembled in a set>.
(https://www.bearing.com.cn/)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Latest News on 10 June 2022 | VISTA’s New Order to Global Agent about spherical Roller Bearings and Short Clindrical Roller Bearing Used for Mining Machinery
Next excellent exporter of auto bearing recommendation---2022 CnBearing Online Expo
Next excellent exporter of auto bearing recommendation---2022 CnBearing Online Expo
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
