NTN Has Developed an Intelligent Axle Unit with Force Detection Sensors
Resource from: CBCC Likes:2979
Nov 18,2005
NTN Has Developed an Intelligent Axle Unit with Force Detection Sensors for More Accuracy Vehicle Stability Control
NTN has recently developed an intelligent axle unit with force detection sensors, which detect vehicle cornering force and traction force without a time lag. The unit comprised of a hub and a constant velocity joint (CV joint) can help enhance more accurate and detailed vehicle stability control.
Two types of sensors installed in the hub bearing and CV joint detect small amounts of distortions in the hub bearing due to vehicle cornering force, and in the CV joint due to traction force respectively without a time lag. The detected distortions are then converted into the force acting between tires and road.
Recently, various technologies have been put in practical use for enhancing vehicle safety and stability, and among them are the vehicle stability control (VSC) systems, which help prevent vehicle from slipping and skidding when entering a curve at an excessive speed or during abrupt steering. The existing VSC systems control braking force and engine output in response to vehicle dynamic behavior detected based on information from a yaw-rate sensor and a lateral acceleration sensor in addition to the operational information from steering wheel, throttle valve and brake pedals, however, there is a certain time lag in detecting the force between tire and road because the sensors are usually attached on the sprung body and thus affected by the suspension system of vehicle.
On the other hand, the developed unit detects the force acting between tire and road without a time lag, since the sensors are attached on the unsprung side, Furthermore, the independent detection of cornering and traction forces on each wheel helps realize more accurate and detailed vehicle stability control.
[Feature]
1.Possible to sense for each wheel the force acting between the tires and road.
·Cornering force: Detection with high-sensitivity distortion detection sensor unit housed in the hub bearing.
·Traction force: Detection with contactless angle sensor unit attached to the CV joint .
2.Real-time sensing of force acting between tires and road.
·Cornering force and traction force are measured on the axle that is not influenced by suspension characteristics to realize sensing without time delays.
[Contact]
·New Product Planning Group
Intellectual Property Planning Department
Phone 0538-21-1150
()
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
