NTN Develops Ultra Low-torque Tapered Roller Bearings(Pic)
Resource from: CBCC Likes:2979
Feb 27,2006
NTN Corporation (NTN) has responded to demands for improved energy and fuel efficiency in general industrial machinery and automobiles with the development of Ultra Low-torque Tapered Roller Bearings, featuring half the rotating torque of conventional bearings, while maintaining the same fatigue life and rigidity.
Tapered roller bearings have greater load capacity and rigidity than ball bearings. For this reason, they are widely used in general industrial machinery, construction machinery, and automobiles. However, tapered roller bearings have greater rotating torque than ball bearings. There has been demand to reduce this rotating torque in order to improve energy efficiency.
Thus, NTN developed an optimized design that greatly reduces Elastohydrodynamic Lubrication(EHL) rolling resistance and sliding friction resistance. This bearing also features cage pocket shape that reduces agitation resistance by optimizing the oil flow inside the bearing in order to reduce rotating torque under oil lubrication. We also applied our unique FA heat treatment technology and high load-capacity design. As a result, we were able to develop a bearing with torque reduced to half that of its conventional counterpart under the same operating conditions, while maintaining the same fatigue life and rigidity.
[Features]
1.Low torque (half the rotating torque of conventional bearing)
A.Optimized design greatly reduces EHL rolling resistance and sliding friction resistance.
B.New cage pocket shape reduces agitation resistance of oil.
2.Same fatigue life as conventional bearings (compared to previous NTN product)
Application of NTN's proprietary FA heat treatment technology (fine austenite strengthening treatment) and high load-capacity design with maximized roller count bring about the same fatigue life and rigidity as conventional bearings by counterbalancing reduced load-capacity when low-torque specifications are applied.
(Lower torque specifications are preferable to save energy. In general, however, as specifications allow for lower-torque, rated load capacity is reduced.)
3.Same rigidity as conventional bearings (compared to previous NTN product)
Application of high load-capacity design with maximized roller count
[Applications]
General industrial machinery:
Construction machinery, transportation equipment, hydraulic machinery, etc.
Automobiles:
Transmissions, differentials, etc.
[Contacts]
Planning and Marketing Department, Industrial Sales Headquarters
Phone: 03-5487-2815
Planning and Marketing Department, Automotive Sales Headquarters
Phone: 03-5487-2814
[Photograph of product]
Features]
Lower torque: 1/2 previous product
Smaller bearing: More than 10% reduction in bearing outer diameter (Same fatigue life/rigidity as previous product)
Challenges and Solutions]
Challenge 1: Achieve low torque
Solution: Optimized design
New cage pocket shape reduces oil's agitation resistance
Challenge 2: Same lifetime as conventional bearings
Solution: FA heat treatment
2.8 times longer lifetime than conventional 4T product under pure oil conditions
Challenge 3: Same rigidity as conventional bearings
Solution: High load capacity design
roller count maximized by bringing cage closer to outer ring
[Performance]
Achieves 1/2 the torque of previous product at commercial range of 500-2,000 rpm.
Nearly same rigidity between previous and new products
Features]
Lower torque: 1/2 previous product
Smaller bearing: More than 10% reduction in bearing outer diameter (Same fatigue life/rigidity as previous product)
Challenges and Solutions]
Challenge 1: Achieve low torque
Solution: Optimized design
New cage pocket shape reduces oil's agitation resistance
Challenge 2: Same lifetime as conventional bearings
Solution: FA heat treatment
2.8 times longer lifetime than conventional 4T product under pure oil conditions
Challenge 3: Same rigidity as conventional bearings
Solution: High load capacity design
roller count maximized by bringing cage closer to outer ring
[Performance]
Achieves 1/2 the torque of previous product at commercial range of 500-2,000 rpm.
Nearly same rigidity between previous and new products
()
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous NRB Reports Third Quarter 2006 Results
Next SKF Reliability Maintenance Institute Tehran(pic)
Next SKF Reliability Maintenance Institute Tehran(pic)
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
Simplified Chinese 
English 
Arabic 
Polish 
Danish 
German 
Russian 
French 
Finnish 
Korean 
Dutch 
Czech 
Lithuanian 
Mongolian 
Norwegian 
Portuguese 
Japanese 
Swedish 
Serbian 
Slovenian 
Thai 
Turkish 
Ukrainian 
Spanish 
Italian 
Hungarian 