Warning: Invalid argument supplied for foreach() in D:\wwwroot\bearing.com.cn\wwwroot\wap\news_detail.php on line 50
What is the process for installing turntable bearings-News&Events-Luoyang E-FIND Precision Bearing Manufacturing Co. Ltd
What is the process for installing turntable bearings
22 Aug,2023

What is the process for installing turntable bearings

1.jpg

Installation Steps:

1.Prepare Your Workspace: Set up your work area with enough space to lay out the turntable components and work comfortably. Make sure you have all the necessary tools and materials at hand.

2.Remove the Platter: If your turntable has a removable platter, carefully lift it off the turntable. Depending on the design, you might need to remove any screws or retaining clips holding the platter in place.

3.Access the Bearing: With the platter removed, you should be able to access the turntable's bearing assembly. This might involve removing a dust cover, a mat, or other components that could be covering the bearing.

4.Remove Old Bearing (if applicable): If you're replacing an old bearing, carefully unscrew and remove the old bearing assembly according to the manufacturer's instructions. Keep track of any screws or parts that you remove.

5.Install New Bearing: Follow the manufacturer's instructions to install the new turntable bearing. This might involve securing the bearing assembly with screws or other fasteners. Make sure to tighten the screws securely but not excessively.

6.Lubrication (if required): Some turntable bearings require lubrication. If your bearing's manufacturer recommends lubrication, apply the appropriate lubricant according to their instructions. Be cautious not to over-apply, as excessive lubrication can lead to issues.

7.Reassemble: Carefully reassemble any components you removed earlier, such as the dust cover, mat, and platter. Make sure everything is properly aligned and secured.

8.Test: Gently spin the platter to ensure that it rotates smoothly on the new bearing. Check for any wobbling or grinding noises, which could indicate an installation issue.

9.Final Checks: Check that all screws and fasteners are properly tightened. Ensure that the platter sits level and does not wobble.

10.Calibration (if applicable): Depending on your turntable's design, you might need to calibrate the tracking force, anti-skate, and other settings. Consult your turntable's user manual for guidance on this step.

Contact


Company:Luoyang EFANT Precision Bearing Manufacturing Co. Ltd


Address:No. 9 Jingjin North Rd, Luoxin Development Zone, 

Xin'an County, Luoyang City, Henan Province 471003, China


Tel:86-379-80887690


export@efindbearing.com


https://www.efindbearing.com

https://www.efindbearing.com/contact-us

https://www.efindbearing.com/rotary-table-bearing/yrt-rotary-table-bearing/yrt580-rotary-table-bearings.html

 


BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.

Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.

China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.