Siemens and Kuka join forces on machine tool robotics
Resource from: Drives & Controls
30 Sep,2013
Siemens Drive Technologies and Kuka Robots have announced a cooperation agreement centred on the integration of Kuka robots with Siemens CNC systems for machine tool applications.
The cooperation – announced at the EMO machine tool exhibition in Germany – is targeting automated loading and machining applications.
There are three areas, in particular, where Siemens and Kuka believe that robots could help to boost the intelligence and performance of machine tools:
• they estimate that about a fifth of the 660,000 loading and unloading machines installed every year could be automated economically using robots;
• for lightweight construction, involving materials such as plastics and aluminium alloys, robots could help to machine large parts that involve many synchronised axes; and
• by using robots to take on “simple” tasks such as deburring, brushing, roughing or finishing, spindle runtimes could be reduced during machining, and productivity increased. Integrating robots in this way can raise quality, and exploit idle times, they say.
At the centre of the joint development is the operator-friendly use of robots to load machine tools. As part of their cooperation, Siemens and Kuka also intend to work on innovative techniques for machining new materials such as composites.
They point out that robots offer extended working zones that can improve the machining of large items such as aircraft wing parts or car bodies. In such applications, the components are often too big and complex to move them or to machine them using conventional Cartesian techniques. In such cases, robots can often replace expensive specialised systems.
Dr Robert Neuhauser, CEO of Siemens Motion Control Systems (left) and Kuka Robots CEO, Manfred Gundel, at the cooperation announcement
Robotic machining can also be used in a similar way to CNC machines for multiple machining of parts, handling tasks such as drilling, riveting, trimming, deburring and simple milling, as well as performing auxiliary roles such as measuring, marking and testing. Robots often cost less than machine tools, if precision is not critical. Programming and operation can be performed in a Siemens Sinumerik CNC environment, and robots can be integrated into the CAD/CAM/CNC design chain.
Users who already use engineering tools such as NX CAM can continue to design and simulate parts in a familiar environment and can implement parts directly from engineering in production.
“With this joint approach, the two companies are strengthening the fundamental idea of integrated production and can, for example, develop new markets by close intermeshing of machine tool tasks and loading tasks,” says Kuka CEO, Manfred Gundel.
“The CNC control from Siemens and the robot controls from Kuka are ideal for integrating robot and CNC technology,” adds Dr Robert Neuhauser, CEO of Siemens’ Motion Control Systems business. “With this cooperation, we are deepening our many years of cooperation and together advancing intelligent automation solutions as outlined by the Industry 4.0 project for the benefit of both partners and to expand business.”
The companies plan to develop scalable, integrated systems for machining workpieces with robots. These will range from robots with added CNC machining functions, to pure CNC machining systems. They aim to integrate the robots into PLM processes.
At the EMO show, Siemens and Kuka demonstrated the integration of a robot with the Sinumerik user interface for programming, teach-in, and diagnostics. The next step will be to extend the connection to CNC tasks.
The cooperation – announced at the EMO machine tool exhibition in Germany – is targeting automated loading and machining applications.
There are three areas, in particular, where Siemens and Kuka believe that robots could help to boost the intelligence and performance of machine tools:
• they estimate that about a fifth of the 660,000 loading and unloading machines installed every year could be automated economically using robots;
• for lightweight construction, involving materials such as plastics and aluminium alloys, robots could help to machine large parts that involve many synchronised axes; and
• by using robots to take on “simple” tasks such as deburring, brushing, roughing or finishing, spindle runtimes could be reduced during machining, and productivity increased. Integrating robots in this way can raise quality, and exploit idle times, they say.
At the centre of the joint development is the operator-friendly use of robots to load machine tools. As part of their cooperation, Siemens and Kuka also intend to work on innovative techniques for machining new materials such as composites.
They point out that robots offer extended working zones that can improve the machining of large items such as aircraft wing parts or car bodies. In such applications, the components are often too big and complex to move them or to machine them using conventional Cartesian techniques. In such cases, robots can often replace expensive specialised systems.
Dr Robert Neuhauser, CEO of Siemens Motion Control Systems (left) and Kuka Robots CEO, Manfred Gundel, at the cooperation announcementRobotic machining can also be used in a similar way to CNC machines for multiple machining of parts, handling tasks such as drilling, riveting, trimming, deburring and simple milling, as well as performing auxiliary roles such as measuring, marking and testing. Robots often cost less than machine tools, if precision is not critical. Programming and operation can be performed in a Siemens Sinumerik CNC environment, and robots can be integrated into the CAD/CAM/CNC design chain.
Users who already use engineering tools such as NX CAM can continue to design and simulate parts in a familiar environment and can implement parts directly from engineering in production.
“With this joint approach, the two companies are strengthening the fundamental idea of integrated production and can, for example, develop new markets by close intermeshing of machine tool tasks and loading tasks,” says Kuka CEO, Manfred Gundel.
“The CNC control from Siemens and the robot controls from Kuka are ideal for integrating robot and CNC technology,” adds Dr Robert Neuhauser, CEO of Siemens’ Motion Control Systems business. “With this cooperation, we are deepening our many years of cooperation and together advancing intelligent automation solutions as outlined by the Industry 4.0 project for the benefit of both partners and to expand business.”
The companies plan to develop scalable, integrated systems for machining workpieces with robots. These will range from robots with added CNC machining functions, to pure CNC machining systems. They aim to integrate the robots into PLM processes.
At the EMO show, Siemens and Kuka demonstrated the integration of a robot with the Sinumerik user interface for programming, teach-in, and diagnostics. The next step will be to extend the connection to CNC tasks.
(Drives & Controls)
(CBCC News Statement)
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
