Barden custom-engineers precision bearing units for ellipsometry inspection equipment
Barden has supplied super-precision bearing units to a customer in south-east Asia for mounting to ellipsometry inspection equipment that checks the integrity of thin-film-coated hard-drive disks. The custom bearing units comprise a pair of angular-contact, thin-section, double-row bearings in a housed assembly, ready for fitting to the ellipsometer equipment.
The customer had been experiencing too many failures of the previous bearings on the ellipsometer turntable. These bearings were standard thin-section pairs that were pre-loaded to ensure there was no internal play. The disadvantage of these bearings was the increased torque levels that were required.
The customer approached Barden to see if it could supply a new design of bearing with lower torque but accurate running. The Barden bearing units offer low torque and accurate running and incorporate stainless steel rings and balls. Because the application is low speed and low torque, the bearings are oil lubricated.
The angular-contact, thin-section, double-row bearings have an outside diameter of 28.5mm with a width of slightly less than 9mm and a bore of 19mm. Barden took part of the ellipsometer housing and incorporated it into the first bearing’s outer ring.
Due to the low-speed, low torque application, the bearing units were fitted with special PTFE toroidal separators between the stainless steel balls. These encircle alternate balls.
Key benefits of product application
* The bearings are manufactured to super-precision standards (higher than ABEC 7).
* The bearing units were supplied fully assembled with a flange to enable the customer to mount the units quickly and easily to the ellipsometer column.
* The Barden design is cleaner, reduces manual handling and reduces risk of damage to the bearings.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next SC Fastener Systems Quadruples Facility Space
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
