TechnoCentre éolien selected to optimize production of Senvion wind turbines in icing conditions
Resource from: TechnoCentre Likes:166
Dec 07,2015
In partnership with Senvion Canada, the TechnoCentre éolien (TCE) will carry out a project over the next three years that aims to optimize the control function of Senvion MM wind turbines in icing conditions.
The objective consists of maximizing energy production while minimizing risk to the structural integrity of the turbine and its components. TCE intends to help improve icing detection, validate icing loads, and optimize the turbine’s control parameter during icing events.
Over the next three years, TCE intends to monitor, improve icing detection, and optimize Senvion wind turbines in cold-climate conditions.
These objectives will be achieved by means of a measurement campaign on no fewer than four Senvion MM CCV turbines currently operating at several wind farms in Quebec, Canada. These wind farms experience moderate-to-severe icing conditions. The turbines will be fitted with meteorological instruments and icing sensors, and the meteorological, operational, and structural load data will be analyzed and correlated. The turbines’ control function in icing conditions will then be optimized based on the results of analyses.
“Over the past few years, the TechnoCentre éolien has developed an expertise in icing characterization and video image analysis. Today, this expertise allows us to undertake this large and important research project with Senvion Canada, a trustworthy partner of TCE with whom we have collaborated for a number of years”, affirms Frédéric Côté, General Manager of the TechnoCentre éolien.
Helmut Herold CEO of Senvion in North America added. “We are proud to continue our work with TechnoCentre éolien. TCE’s expertise and knowledge has helped Senvion adapt its products to best fit Quebec’s cold climate conditions and continue to research and optimize our machines. A partnership such as this brings into light the continued innovation that is emerging in Quebec, which aims to improve on existing standards.”
This project benefits from a research subsidy of $448,032 granted by the Natural Sciences and Engineering Research Council of Canada to the Cégep de la Gaspésie et des Îles in liaison with the TechnoCentre éolien. The project will also have considerable advantages for the teaching establishment through student involvement. It is noted that a contribution from Senvion Canada estimated at $735,953 completes the cost of the project.
Senvion Canada
Over the next three years, TCE intends to monitor, improve icing detection, and optimize Senvion wind turbines in cold-climate conditions.
These objectives will be achieved by means of a measurement campaign on no fewer than four Senvion MM CCV turbines currently operating at several wind farms in Quebec, Canada. These wind farms experience moderate-to-severe icing conditions. The turbines will be fitted with meteorological instruments and icing sensors, and the meteorological, operational, and structural load data will be analyzed and correlated. The turbines’ control function in icing conditions will then be optimized based on the results of analyses.
“Over the past few years, the TechnoCentre éolien has developed an expertise in icing characterization and video image analysis. Today, this expertise allows us to undertake this large and important research project with Senvion Canada, a trustworthy partner of TCE with whom we have collaborated for a number of years”, affirms Frédéric Côté, General Manager of the TechnoCentre éolien.
Helmut Herold CEO of Senvion in North America added. “We are proud to continue our work with TechnoCentre éolien. TCE’s expertise and knowledge has helped Senvion adapt its products to best fit Quebec’s cold climate conditions and continue to research and optimize our machines. A partnership such as this brings into light the continued innovation that is emerging in Quebec, which aims to improve on existing standards.”
This project benefits from a research subsidy of $448,032 granted by the Natural Sciences and Engineering Research Council of Canada to the Cégep de la Gaspésie et des Îles in liaison with the TechnoCentre éolien. The project will also have considerable advantages for the teaching establishment through student involvement. It is noted that a contribution from Senvion Canada estimated at $735,953 completes the cost of the project.
Senvion Canada
(TechnoCentre)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous HYTORC’s bolting products demonstrated at Power-Gen
Next Schaeffler AG will be admitted to SDAX
Next Schaeffler AG will be admitted to SDAX
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
