Your location:  Home  >  Bearing News  >  World Bearing News
<<  Back

Why Do Engineers Cut Grooves In Crankshaft Bearings?

Resource from:  https://www.cycleworld.com/ Likes:189
Nov 13,2018

This Honda CBR600RR crankshaft is another example of how inanimate, unvocal engine parts can tell a story. With respect to lubrication, oil comes up from the gallery below the crankshaft and enters each main bearing through a drilling.

You’ll notice four of the main bearings have grooves in the middle; one bearing has no groove. If you had a crankshaft from the predecessor of this engine, the CBR600F, you would see all of its main bearings were groove-less. Why did Honda make this change?

This engine—and most car engines, as well—gets oil to the crankpins by bleeding it off the main bearings. A hole is drilled at an angle down through the crankpin into the bearing, and a little plug is staked in place.

That drill way conducts oil from this bearing through the flywheel cheek into the hollow crankpin, and the oil comes out through two holes to lubricate the rod bearing. That sounds like it makes excellent sense.

If this crankshaft is turning 14,000 rpm, oil has to be pumped into the crankshaft against so-called centrifugal force to get it into the drilling that carries it to the crankpin. Every manufacturer that has made high-rpm engines has run into this same problem.

They start seeing little problems with their connecting-rod bearings. They develop black streaks. That’s not metal-to-metal contact, but it’s the next thing to it. When you see those black streaks, you think to yourself, “Not much margin there.”

(https://www.cycleworld.com/)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.

BRIEF INTRODUCTION

Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.

Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.

China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.